Tinkercad Christmas - Christmas Wreath
Tinkercad Christmas - Christmas Wreath
3D
Published 2019-08-13T12:41:48+00:00
This object was made in Tinkercad.
https://www.tinkercad.com/things/7ZZCX1Q8sO8
https://www.tinkercad.com/things/3HMlUez01cM
https://www.tinkercad.com/things/c5ireKAsgdd
https://www.tinkercad.com/things/cdRbHN2BlKf
Happy - Tinkercad Christmas -
Wreath body should be printed first followed by a sample a leaf.
I should already have applied enoguh of a deviation to the holes and leaf to give some room to plug the stems into the wreath body,
however due to printer accuracy you may need to adjust the stems after testing your first leaf.
There are obviously more holes in the wreath body, you may need to judge how many leaves you want to print and leaving graps if desired.
It may also be desired to change the height of the stems in order to achieve the appropriate layering and depth perception.
Bells were made to be used with a rope and tied in the middle of the wreath for aesthetics.
| 发表的日期 | 13/08/2019 |
| 打印工艺 | FDM |
| 支持自定义 | YES |
Coole print which can be used in your home