Ziploc Bag Holder
Ziploc Bag Holder
3D
Published 2017-10-09T09:39:28+00:00
This is a Ziploc bag holder. Allowing you to easily fill Ziploc bags without the need to have an assistant hold the bag open for you.
Saw a post on the 3D printing FB group showing a product like this. Someone posted an STL from thingaverse. But that required binder clips to keep the bag clips extended. So i decided to make my own version. Giving it a wider base to accomidate a gallon sized bag better. Of course i fixed it so the bag clips could hold themselves in place.
Print as is. No infill is required. You will need to print 2 of each of the following files.
ziplock-bag-holder-clip
ziplock-bag-holder-sleeve-right
ziplock-bag-holder-sleeve-left
You will need to glue the left and right sleeves together.
| 发表的日期 | 09/10/2017 |
| 让时间去下载 | 160 - 210 分钟 |
| 尺寸大小 | 100x100x |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |
