demomonkey's Print of gameshell case
1,699
views
0 comments
Loading comments... 
Community Print 3D Print of gameshell case
Published 2018-10-08T08:06:49+00:00
10
0
Printed on: Lulzbot Mini
Material: PLA
Description
New GameShell in LulzBot Green, just because.
1st draft at getting some new shells for the new GameShell platform made up. These are the older STL files that were released earlier in the year (thx for posting, r3g27) by the company, but the similarity and fit to the final release plastic molded shells are almost exact. 3D printed top fits the molded case bottom, vice versa. Some close ups of the 2 cases. Removed supports, but no other post production. A quick sand, or heat gun should smooth out the imperfections nicely.
Very little modifications. Used 0.18 layers, 100% infill with Polymaker PLA. Used raft and supports, as you can't print flat to the bed, due to ridges on the outer surfaces. Not the easiest print with the amount of support you have to use.
Will try for another higher quality print with nGen to put on the final customization touches.