Hexhog Tabletop's: Formidable Fronts
Created by
-
$ 42,203
raised
-
544
pioneers
Campaign Closed: Fri, December 10, 2021 at 10:00 AM GMT
- Pledges (7)
- Add-ons (7)
-
$42,203.26
raised
-
544
pioneers
Tiers
12 pioneers
USD 80.00
Hexhog Tabletops: Rambling Road - Expansion Set -
USD 16.99
Rambling Roads - Expansion
With this expansion you can build your modular roads into your area terrain to entire tables.
Includes 10 highly detailed sculpts, 2 with asymmetrical geometry and supplied mirrored. Delivered as a set of over XX files.
This set is an expansion and will need Hinterland Hills - Core Set - (sold seperately) to be used to as it is intended.
Currently available for separate purchase: Hinterland Hills: Core Set, Calamitous Crags and Cliffs: Expansion
Hexhog Tabletops: Calamitous Crags and Cliffs - Expansion Set -
USD 16.99
This zip file is the Hexhog Tabletop LLC Calamitous Cliffs & Crags release all files prefaced with CC-xxxxxx formatAll files provided as whole and cut into top and bottom fro smaller print bed support.
CC-B01-200000-v1 -> 1 point double rise hex.
CC-C01-220000-v1 -> 2 point double rise hex.
CC-D01-222000-v1-> 3 point double rise hex.
CC-E01-222200-v1 -> 4 point double rise hex.
CC-G01-210000-v1-> 1 Point double rise, 1 point single rise hex.
CC-G01-210000m-v1-> 1 Point double rise, 1 point single rise hex. (Mirror)
CC-H01-221000-v1 ->2 points double rise, 1 point single rise hex.
CC-H01-221000m-v1 ->2 points double rise, 1 point single rise hex. (Mirror)
CC-J01-221001-v1 -> 2 point double rise, 1 point single rise, 1 point single rise
CC-J01-221001m-v1 -> 2 point double rise, 1 point single rise, 1 point single rise (Mirror)
CC-M01-LNGSTP-v1 -> Double Rise long side step
CC-M01-LNGSTPm-v1 -> Double Rise long side step. (Mirror)
CC-N01-221101-v1 -> 2 point, double rise, single ris, two point single rise
CC-N01-221101m-v1 -> 2 point double rise, single ris, two point single rise (Mirror)
CC-T01-SRTSTP-v1 -> Double Rise short side step.
CC-T01-SRTSTPm-v1 -> Double Rise short side step. (Mirror)
Files are grouped as follows:
hollow: Component files that have been pre-hollowed. 1.5mm wall thickness.
hollow-supports: Component files that have been pre-hollowed and supported. 1.5mm wall thickness.
standard: Standard files stls, no hollows, or printer type prep
Important: We strongly reccommend building hills one level at at time as the components are designed to fit snugly and trying to jam a piece in when pieces on layers above it are in place can be a frustrating adventure!
License for our files
Private Use Only
Non Commercial
No Derivatives distribution of any sort.
By downloading files from our MMF page, you are purchasing a non-distribution licence to use these files. You are not purchasing the intellectual property of the files nor the assets used in creating the files.
Do not under any circumstances share these files for free or commercially.
IMPORTANT: Rules, Terms and Conditions
All files and links we share with our backers are meant for you as supporter and no one else. By downloading content made by us (Stl files, Zips. etc), you accept this Agreement and agree to be bound by its provisions. If you do not accept or agree with these terms, do not download the content we provide:
Hexhog Tabletops LLC is the owner of the STL files. The STL files are copyrighted work belonging to Hexhog Tabletops LLC.
Hexhog Tabletops LLC grants you a non-transferable, non-exclusive license to use the files.
You may only use the content provided by us (Stl and their location Links) for personal use, and you are not allowed to distribute or sell them nor the prints.
You can cut/resize our files to fit better your printer or personal needs but you can't share those derivative works (along with the original files).
You can't edit our 3d Files (stl) or use portions of them to create new content for any sort of distribution, sale, or other disbursement.
Our models and miniatures, any other kind of 3d file we release or or portions of our files can't be used in any other project, Kickstarter, Patreon, or any other crowdfunding platform, website, or release.
You can't make molds of our models, reproduction or casting or any kind of mass production is prohibited.
You can take photos, make live streams and video with our printed files (ideally to Showing 3d printer results or painting examples or awesome battler reports!) as long as you state that the models have been made by us. In this case our MyMiniFactory Store / Campaign would be greatly appreciated. Also a courtesy cross-post on our discord channel is appreciated!
All copyrights belong to Hexhog Tabletops, No rights are assigned or transferred to the end-user. Our designs are protected by intellectual property laws.
Revision Notes
Hexhog Tabletops: Hinterland Hills - Core Set -
USD 44.99
Hinterland Hills - Core Set
With this set you can build your modular terrain to create scatter hills to entire tables.
Includes 51 highly detailed sculpts, 2 with asymmetrical geometry and supplied mirrored. Delivered as a set of 171 files.
In this set you get all files associated with Hinterland Hills portion of the original kickstarter.
Expansions sold separately. Currently available for seperate purchase: Calamitous Crags and Cliffs; Rambling Roads
Hexhog Tabletops: Formidable Fronts Expansion Set
igital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
This zip file is the Hexhog Tabletop LLC Formidable Fronts release all files prefaced with FF-xxxxxx format. Files provided in standard, hollow, and hollow supported when applicable.
FF-A01-000000-v1 -> Single Tank Trap Flat No Inserts
FF-A02-000000-v1 -> Double Tank Trap Flat No Inserts
FF-A03-000000-v1 -> Triple Tank Trap Flat No Inserts
FF-A04-000000-v1 -> Quad Tank Trap Flat No Inserts
FF-BS2-111110-v1 Small Bunker Part B
FF-BS3-110000-v1 Small Bunker Part C
Files are grouped as follows:
hollow: Component files that have been pre-hollowed. 1.5mm to 2.5mm wall thickness, depending on interior geometry
hollow-supports: Component files that have been pre-hollowed and supported. 1.5mm-2.5mm wall thickness depending on interior geometry
standard: Standard files stls, no hollows, or printer type prep
Important: We strongly reccommend building hills one level at at time as the components are designed to fit snugly and trying to jam a piece in when pieces on layers above it are in place can be a frustrating adventure!
License for our files
Private Use Only
Non Commercial
No Derivatives distribution of any sort.
By downloading files from our MMF page, you are purchasing a non-distribution licence to use these files. You are not purchasing the intellectual property of the files nor the assets used in creating the files.
Do not under any circumstances share these files for free or commercially.
IMPORTANT: Rules, Terms and Conditions
All files and links we share with our backers are meant for you as supporter and no one else. By downloading content made by us (Stl files, Zips. etc), you accept this Agreement and agree to be bound by its provisions. If you do not accept or agree with these terms, do not download the content we provide:
Hexhog Tabletops LLC is the owner of the STL files. The STL files are copyrighted work belonging to Hexhog Tabletops LLC.
Hexhog Tabletops LLC grants you a non-transferable, non-exclusive license to use the files.
You may only use the content provided by us (Stl and their location Links) for personal use, and you are not allowed to distribute or sell them nor the prints.
You can cut/resize our files to fit better your printer or personal needs but you can't share those derivative works (along with the original files).
You can't edit our 3d Files (stl) or use portions of them to create new content for any sort of distribution, sale, or other disbursement.
Our models and miniatures, any other kind of 3d file we release or or portions of our files can't be used in any other project, Kickstarter, Patreon, or any other crowdfunding platform, website, or release.
You can't make molds of our models, reproduction or casting or any kind of mass production is prohibited.
You can take photos, make live streams and video with our printed files (ideally to Showing 3d printer results or painting examples or awesome battler reports!) as long as you state that the models have been made by us. In this case our MyMiniFactory Store / Campaign would be greatly appreciated. Also a courtesy cross-post on our discord channel is appreciated!
All copyrights belong to Hexhog Tabletops, No rights are assigned or transferred to the end-user. Our designs are protected by intellectual property laws.
Revision Notes
01_FF_Standard_v2.zip -> FF-U1-EDGCTL-V2, FF-V02-EDGEVTR-v2, FF-W01-EDGDTL-v2 corrections posted.
⠀⠀ This pledge is for those of you who are looking to get your hands on these awesome trench and bunkers expansions but missed out on our first Kickstarter. This level does not include any stretch goals and is only the basic Formidable front Set with the complete first KS. Includes: Formidable Fronts - Expansion Hinterland Hills - Core Set - (From our first KS) Calamitous Crags and Cliffs - Expansion - (From our first KS) Rambling Rivers and Roads - Expansion -(From our first KS) No stretch goals
284 pioneers
USD 110.00
Formidable Fronts Stretch Goals Set
The Formidable Fronts - Stretch Goals Set- includes all STLs (solid, hollowed and supported files) which were associated with our Formidable Fronts Crowd funding campaign. This set includes both the unlocked, and as a thank you, the stretch goals we didn't unlock during the campaign. Also inlcuded are Tank Trap add-ons for making your own pieces with added tank traps.
Our website www.hexhogtabletops.com
Hexhog Tabletops: Rambling Road - Expansion Set -
USD 16.99
Rambling Roads - Expansion
With this expansion you can build your modular roads into your area terrain to entire tables.
Includes 10 highly detailed sculpts, 2 with asymmetrical geometry and supplied mirrored. Delivered as a set of over XX files.
This set is an expansion and will need Hinterland Hills - Core Set - (sold seperately) to be used to as it is intended.
Currently available for separate purchase: Hinterland Hills: Core Set, Calamitous Crags and Cliffs: Expansion
Hexhog Tabletops: Calamitous Crags and Cliffs - Expansion Set -
USD 16.99
This zip file is the Hexhog Tabletop LLC Calamitous Cliffs & Crags release all files prefaced with CC-xxxxxx formatAll files provided as whole and cut into top and bottom fro smaller print bed support.
CC-B01-200000-v1 -> 1 point double rise hex.
CC-C01-220000-v1 -> 2 point double rise hex.
CC-D01-222000-v1-> 3 point double rise hex.
CC-E01-222200-v1 -> 4 point double rise hex.
CC-G01-210000-v1-> 1 Point double rise, 1 point single rise hex.
CC-G01-210000m-v1-> 1 Point double rise, 1 point single rise hex. (Mirror)
CC-H01-221000-v1 ->2 points double rise, 1 point single rise hex.
CC-H01-221000m-v1 ->2 points double rise, 1 point single rise hex. (Mirror)
CC-J01-221001-v1 -> 2 point double rise, 1 point single rise, 1 point single rise
CC-J01-221001m-v1 -> 2 point double rise, 1 point single rise, 1 point single rise (Mirror)
CC-M01-LNGSTP-v1 -> Double Rise long side step
CC-M01-LNGSTPm-v1 -> Double Rise long side step. (Mirror)
CC-N01-221101-v1 -> 2 point, double rise, single ris, two point single rise
CC-N01-221101m-v1 -> 2 point double rise, single ris, two point single rise (Mirror)
CC-T01-SRTSTP-v1 -> Double Rise short side step.
CC-T01-SRTSTPm-v1 -> Double Rise short side step. (Mirror)
Files are grouped as follows:
hollow: Component files that have been pre-hollowed. 1.5mm wall thickness.
hollow-supports: Component files that have been pre-hollowed and supported. 1.5mm wall thickness.
standard: Standard files stls, no hollows, or printer type prep
Important: We strongly reccommend building hills one level at at time as the components are designed to fit snugly and trying to jam a piece in when pieces on layers above it are in place can be a frustrating adventure!
License for our files
Private Use Only
Non Commercial
No Derivatives distribution of any sort.
By downloading files from our MMF page, you are purchasing a non-distribution licence to use these files. You are not purchasing the intellectual property of the files nor the assets used in creating the files.
Do not under any circumstances share these files for free or commercially.
IMPORTANT: Rules, Terms and Conditions
All files and links we share with our backers are meant for you as supporter and no one else. By downloading content made by us (Stl files, Zips. etc), you accept this Agreement and agree to be bound by its provisions. If you do not accept or agree with these terms, do not download the content we provide:
Hexhog Tabletops LLC is the owner of the STL files. The STL files are copyrighted work belonging to Hexhog Tabletops LLC.
Hexhog Tabletops LLC grants you a non-transferable, non-exclusive license to use the files.
You may only use the content provided by us (Stl and their location Links) for personal use, and you are not allowed to distribute or sell them nor the prints.
You can cut/resize our files to fit better your printer or personal needs but you can't share those derivative works (along with the original files).
You can't edit our 3d Files (stl) or use portions of them to create new content for any sort of distribution, sale, or other disbursement.
Our models and miniatures, any other kind of 3d file we release or or portions of our files can't be used in any other project, Kickstarter, Patreon, or any other crowdfunding platform, website, or release.
You can't make molds of our models, reproduction or casting or any kind of mass production is prohibited.
You can take photos, make live streams and video with our printed files (ideally to Showing 3d printer results or painting examples or awesome battler reports!) as long as you state that the models have been made by us. In this case our MyMiniFactory Store / Campaign would be greatly appreciated. Also a courtesy cross-post on our discord channel is appreciated!
All copyrights belong to Hexhog Tabletops, No rights are assigned or transferred to the end-user. Our designs are protected by intellectual property laws.
Revision Notes
Hexhog Tabletops: Hinterland Hills - Core Set -
USD 44.99
Hinterland Hills - Core Set
With this set you can build your modular terrain to create scatter hills to entire tables.
Includes 51 highly detailed sculpts, 2 with asymmetrical geometry and supplied mirrored. Delivered as a set of 171 files.
In this set you get all files associated with Hinterland Hills portion of the original kickstarter.
Expansions sold separately. Currently available for seperate purchase: Calamitous Crags and Cliffs; Rambling Roads
Hexhog Tabletops: Grimdark and Galactic Bases
USD 5.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Hexhog Tabletops: Landing Pad
USD 16.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Hexhog Tabletops: Damaged Trenches-FF Expansion⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
USD 29.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Hexhog Tabletops: Formidable Fronts Expansion Set
igital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
This zip file is the Hexhog Tabletop LLC Formidable Fronts release all files prefaced with FF-xxxxxx format. Files provided in standard, hollow, and hollow supported when applicable.
FF-A01-000000-v1 -> Single Tank Trap Flat No Inserts
FF-A02-000000-v1 -> Double Tank Trap Flat No Inserts
FF-A03-000000-v1 -> Triple Tank Trap Flat No Inserts
FF-A04-000000-v1 -> Quad Tank Trap Flat No Inserts
FF-BS2-111110-v1 Small Bunker Part B
FF-BS3-110000-v1 Small Bunker Part C
Files are grouped as follows:
hollow: Component files that have been pre-hollowed. 1.5mm to 2.5mm wall thickness, depending on interior geometry
hollow-supports: Component files that have been pre-hollowed and supported. 1.5mm-2.5mm wall thickness depending on interior geometry
standard: Standard files stls, no hollows, or printer type prep
Important: We strongly reccommend building hills one level at at time as the components are designed to fit snugly and trying to jam a piece in when pieces on layers above it are in place can be a frustrating adventure!
License for our files
Private Use Only
Non Commercial
No Derivatives distribution of any sort.
By downloading files from our MMF page, you are purchasing a non-distribution licence to use these files. You are not purchasing the intellectual property of the files nor the assets used in creating the files.
Do not under any circumstances share these files for free or commercially.
IMPORTANT: Rules, Terms and Conditions
All files and links we share with our backers are meant for you as supporter and no one else. By downloading content made by us (Stl files, Zips. etc), you accept this Agreement and agree to be bound by its provisions. If you do not accept or agree with these terms, do not download the content we provide:
Hexhog Tabletops LLC is the owner of the STL files. The STL files are copyrighted work belonging to Hexhog Tabletops LLC.
Hexhog Tabletops LLC grants you a non-transferable, non-exclusive license to use the files.
You may only use the content provided by us (Stl and their location Links) for personal use, and you are not allowed to distribute or sell them nor the prints.
You can cut/resize our files to fit better your printer or personal needs but you can't share those derivative works (along with the original files).
You can't edit our 3d Files (stl) or use portions of them to create new content for any sort of distribution, sale, or other disbursement.
Our models and miniatures, any other kind of 3d file we release or or portions of our files can't be used in any other project, Kickstarter, Patreon, or any other crowdfunding platform, website, or release.
You can't make molds of our models, reproduction or casting or any kind of mass production is prohibited.
You can take photos, make live streams and video with our printed files (ideally to Showing 3d printer results or painting examples or awesome battler reports!) as long as you state that the models have been made by us. In this case our MyMiniFactory Store / Campaign would be greatly appreciated. Also a courtesy cross-post on our discord channel is appreciated!
All copyrights belong to Hexhog Tabletops, No rights are assigned or transferred to the end-user. Our designs are protected by intellectual property laws.
Revision Notes
01_FF_Standard_v2.zip -> FF-U1-EDGCTL-V2, FF-V02-EDGEVTR-v2, FF-W01-EDGDTL-v2 corrections posted.
This pledge is for those of you who are looking to get your hands on these awesome trench and bunkers expansions but missed out on our first Kickstarter. This level includes all the bells and whistles! Includes: - Formidable Fronts - Expansion - Hinterland Hills - Core Set - (From our first KS) - Calamitous Crags and Cliffs - Expansion - (From our first KS) - Rambling Roads - Expansion -(From our first KS) - Landing Pad Add-on - Craters Add-on - Damages Fronts Add-on - Grimdark and Galactic Bases Add-on - All stretch goals unlocked during the campaign
113 pioneers
USD 104.00
Hexhog Tabletops: Rambling Road - Expansion Set -
USD 16.99
Rambling Roads - Expansion
With this expansion you can build your modular roads into your area terrain to entire tables.
Includes 10 highly detailed sculpts, 2 with asymmetrical geometry and supplied mirrored. Delivered as a set of over XX files.
This set is an expansion and will need Hinterland Hills - Core Set - (sold seperately) to be used to as it is intended.
Currently available for separate purchase: Hinterland Hills: Core Set, Calamitous Crags and Cliffs: Expansion
Hexhog Tabletops: Calamitous Crags and Cliffs - Expansion Set -
USD 16.99
This zip file is the Hexhog Tabletop LLC Calamitous Cliffs & Crags release all files prefaced with CC-xxxxxx formatAll files provided as whole and cut into top and bottom fro smaller print bed support.
CC-B01-200000-v1 -> 1 point double rise hex.
CC-C01-220000-v1 -> 2 point double rise hex.
CC-D01-222000-v1-> 3 point double rise hex.
CC-E01-222200-v1 -> 4 point double rise hex.
CC-G01-210000-v1-> 1 Point double rise, 1 point single rise hex.
CC-G01-210000m-v1-> 1 Point double rise, 1 point single rise hex. (Mirror)
CC-H01-221000-v1 ->2 points double rise, 1 point single rise hex.
CC-H01-221000m-v1 ->2 points double rise, 1 point single rise hex. (Mirror)
CC-J01-221001-v1 -> 2 point double rise, 1 point single rise, 1 point single rise
CC-J01-221001m-v1 -> 2 point double rise, 1 point single rise, 1 point single rise (Mirror)
CC-M01-LNGSTP-v1 -> Double Rise long side step
CC-M01-LNGSTPm-v1 -> Double Rise long side step. (Mirror)
CC-N01-221101-v1 -> 2 point, double rise, single ris, two point single rise
CC-N01-221101m-v1 -> 2 point double rise, single ris, two point single rise (Mirror)
CC-T01-SRTSTP-v1 -> Double Rise short side step.
CC-T01-SRTSTPm-v1 -> Double Rise short side step. (Mirror)
Files are grouped as follows:
hollow: Component files that have been pre-hollowed. 1.5mm wall thickness.
hollow-supports: Component files that have been pre-hollowed and supported. 1.5mm wall thickness.
standard: Standard files stls, no hollows, or printer type prep
Important: We strongly reccommend building hills one level at at time as the components are designed to fit snugly and trying to jam a piece in when pieces on layers above it are in place can be a frustrating adventure!
License for our files
Private Use Only
Non Commercial
No Derivatives distribution of any sort.
By downloading files from our MMF page, you are purchasing a non-distribution licence to use these files. You are not purchasing the intellectual property of the files nor the assets used in creating the files.
Do not under any circumstances share these files for free or commercially.
IMPORTANT: Rules, Terms and Conditions
All files and links we share with our backers are meant for you as supporter and no one else. By downloading content made by us (Stl files, Zips. etc), you accept this Agreement and agree to be bound by its provisions. If you do not accept or agree with these terms, do not download the content we provide:
Hexhog Tabletops LLC is the owner of the STL files. The STL files are copyrighted work belonging to Hexhog Tabletops LLC.
Hexhog Tabletops LLC grants you a non-transferable, non-exclusive license to use the files.
You may only use the content provided by us (Stl and their location Links) for personal use, and you are not allowed to distribute or sell them nor the prints.
You can cut/resize our files to fit better your printer or personal needs but you can't share those derivative works (along with the original files).
You can't edit our 3d Files (stl) or use portions of them to create new content for any sort of distribution, sale, or other disbursement.
Our models and miniatures, any other kind of 3d file we release or or portions of our files can't be used in any other project, Kickstarter, Patreon, or any other crowdfunding platform, website, or release.
You can't make molds of our models, reproduction or casting or any kind of mass production is prohibited.
You can take photos, make live streams and video with our printed files (ideally to Showing 3d printer results or painting examples or awesome battler reports!) as long as you state that the models have been made by us. In this case our MyMiniFactory Store / Campaign would be greatly appreciated. Also a courtesy cross-post on our discord channel is appreciated!
All copyrights belong to Hexhog Tabletops, No rights are assigned or transferred to the end-user. Our designs are protected by intellectual property laws.
Revision Notes
Hexhog Tabletops: Hinterland Hills - Core Set -
USD 44.99
Hinterland Hills - Core Set
With this set you can build your modular terrain to create scatter hills to entire tables.
Includes 51 highly detailed sculpts, 2 with asymmetrical geometry and supplied mirrored. Delivered as a set of 171 files.
In this set you get all files associated with Hinterland Hills portion of the original kickstarter.
Expansions sold separately. Currently available for seperate purchase: Calamitous Crags and Cliffs; Rambling Roads
Hexhog Tabletops: Formidable Fronts Expansion Set
igital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
This zip file is the Hexhog Tabletop LLC Formidable Fronts release all files prefaced with FF-xxxxxx format. Files provided in standard, hollow, and hollow supported when applicable.
FF-A01-000000-v1 -> Single Tank Trap Flat No Inserts
FF-A02-000000-v1 -> Double Tank Trap Flat No Inserts
FF-A03-000000-v1 -> Triple Tank Trap Flat No Inserts
FF-A04-000000-v1 -> Quad Tank Trap Flat No Inserts
FF-BS2-111110-v1 Small Bunker Part B
FF-BS3-110000-v1 Small Bunker Part C
Files are grouped as follows:
hollow: Component files that have been pre-hollowed. 1.5mm to 2.5mm wall thickness, depending on interior geometry
hollow-supports: Component files that have been pre-hollowed and supported. 1.5mm-2.5mm wall thickness depending on interior geometry
standard: Standard files stls, no hollows, or printer type prep
Important: We strongly reccommend building hills one level at at time as the components are designed to fit snugly and trying to jam a piece in when pieces on layers above it are in place can be a frustrating adventure!
License for our files
Private Use Only
Non Commercial
No Derivatives distribution of any sort.
By downloading files from our MMF page, you are purchasing a non-distribution licence to use these files. You are not purchasing the intellectual property of the files nor the assets used in creating the files.
Do not under any circumstances share these files for free or commercially.
IMPORTANT: Rules, Terms and Conditions
All files and links we share with our backers are meant for you as supporter and no one else. By downloading content made by us (Stl files, Zips. etc), you accept this Agreement and agree to be bound by its provisions. If you do not accept or agree with these terms, do not download the content we provide:
Hexhog Tabletops LLC is the owner of the STL files. The STL files are copyrighted work belonging to Hexhog Tabletops LLC.
Hexhog Tabletops LLC grants you a non-transferable, non-exclusive license to use the files.
You may only use the content provided by us (Stl and their location Links) for personal use, and you are not allowed to distribute or sell them nor the prints.
You can cut/resize our files to fit better your printer or personal needs but you can't share those derivative works (along with the original files).
You can't edit our 3d Files (stl) or use portions of them to create new content for any sort of distribution, sale, or other disbursement.
Our models and miniatures, any other kind of 3d file we release or or portions of our files can't be used in any other project, Kickstarter, Patreon, or any other crowdfunding platform, website, or release.
You can't make molds of our models, reproduction or casting or any kind of mass production is prohibited.
You can take photos, make live streams and video with our printed files (ideally to Showing 3d printer results or painting examples or awesome battler reports!) as long as you state that the models have been made by us. In this case our MyMiniFactory Store / Campaign would be greatly appreciated. Also a courtesy cross-post on our discord channel is appreciated!
All copyrights belong to Hexhog Tabletops, No rights are assigned or transferred to the end-user. Our designs are protected by intellectual property laws.
Revision Notes
01_FF_Standard_v2.zip -> FF-U1-EDGCTL-V2, FF-V02-EDGEVTR-v2, FF-W01-EDGDTL-v2 corrections posted.
Hexhog Tabletops: Damaged Trenches-FF Expansion⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
USD 29.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Hexhog Tabletops: Landing Pad
USD 16.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Hexhog Tabletops: Grimdark and Galactic Bases
USD 5.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Formidable Fronts Stretch Goals Set
The Formidable Fronts - Stretch Goals Set- includes all STLs (solid, hollowed and supported files) which were associated with our Formidable Fronts Crowd funding campaign. This set includes both the unlocked, and as a thank you, the stretch goals we didn't unlock during the campaign. Also inlcuded are Tank Trap add-ons for making your own pieces with added tank traps.
Our website www.hexhogtabletops.com
*This Early bird will end on 24th, July, 2021. 3pm UTC This pledge is for those of you who are looking to get your hands on these awesome trench and bunkers expansions but missed out on our first Kickstarter. This level includes all the bells and whistles! Includes: - Formidable Fronts - Expansion - Hinterland Hills - Core Set - (From our first KS) - Calamitous Crags and Cliffs - Expansion - (From our first KS) - Rambling Roads - Expansion -(From our first KS) - Landing Pad Add-on - Craters Add-on - Damages Fronts Add-on - Grimdark and Galactic Bases Add-on - All stretch goals unlocked during the campaign
5 pioneers
USD 40.00
Hexhog Tabletops: Formidable Fronts Expansion Set
igital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
This zip file is the Hexhog Tabletop LLC Formidable Fronts release all files prefaced with FF-xxxxxx format. Files provided in standard, hollow, and hollow supported when applicable.
FF-A01-000000-v1 -> Single Tank Trap Flat No Inserts
FF-A02-000000-v1 -> Double Tank Trap Flat No Inserts
FF-A03-000000-v1 -> Triple Tank Trap Flat No Inserts
FF-A04-000000-v1 -> Quad Tank Trap Flat No Inserts
FF-BS2-111110-v1 Small Bunker Part B
FF-BS3-110000-v1 Small Bunker Part C
Files are grouped as follows:
hollow: Component files that have been pre-hollowed. 1.5mm to 2.5mm wall thickness, depending on interior geometry
hollow-supports: Component files that have been pre-hollowed and supported. 1.5mm-2.5mm wall thickness depending on interior geometry
standard: Standard files stls, no hollows, or printer type prep
Important: We strongly reccommend building hills one level at at time as the components are designed to fit snugly and trying to jam a piece in when pieces on layers above it are in place can be a frustrating adventure!
License for our files
Private Use Only
Non Commercial
No Derivatives distribution of any sort.
By downloading files from our MMF page, you are purchasing a non-distribution licence to use these files. You are not purchasing the intellectual property of the files nor the assets used in creating the files.
Do not under any circumstances share these files for free or commercially.
IMPORTANT: Rules, Terms and Conditions
All files and links we share with our backers are meant for you as supporter and no one else. By downloading content made by us (Stl files, Zips. etc), you accept this Agreement and agree to be bound by its provisions. If you do not accept or agree with these terms, do not download the content we provide:
Hexhog Tabletops LLC is the owner of the STL files. The STL files are copyrighted work belonging to Hexhog Tabletops LLC.
Hexhog Tabletops LLC grants you a non-transferable, non-exclusive license to use the files.
You may only use the content provided by us (Stl and their location Links) for personal use, and you are not allowed to distribute or sell them nor the prints.
You can cut/resize our files to fit better your printer or personal needs but you can't share those derivative works (along with the original files).
You can't edit our 3d Files (stl) or use portions of them to create new content for any sort of distribution, sale, or other disbursement.
Our models and miniatures, any other kind of 3d file we release or or portions of our files can't be used in any other project, Kickstarter, Patreon, or any other crowdfunding platform, website, or release.
You can't make molds of our models, reproduction or casting or any kind of mass production is prohibited.
You can take photos, make live streams and video with our printed files (ideally to Showing 3d printer results or painting examples or awesome battler reports!) as long as you state that the models have been made by us. In this case our MyMiniFactory Store / Campaign would be greatly appreciated. Also a courtesy cross-post on our discord channel is appreciated!
All copyrights belong to Hexhog Tabletops, No rights are assigned or transferred to the end-user. Our designs are protected by intellectual property laws.
Revision Notes
01_FF_Standard_v2.zip -> FF-U1-EDGCTL-V2, FF-V02-EDGEVTR-v2, FF-W01-EDGDTL-v2 corrections posted.
Please note: for the optimal gaming experience, having the files from Hinterland Hills is required (available as an add-on or through the Recruit Pledge). This Veteran pledge is designed for backers of Hinterland Hills only includes the files from Formidable Fronts. For all you previous backers of Hinterland Hills! This set is just formidable fronts expansion pack and is the package designed for those of you who already have backed us before! You will get the basic bunkers and trench components that will allow you to build scatter terrain and tabletops with elaborate bunker and trench configurations. This pledge does not contain any Formidable Fronts add-ons nor any stretch goals unlocked in the campaign. (Requires Hinterland Hills Openlock Technology) Includes: Formidable Fronts - Expansion
241 pioneers
USD 65.00
Formidable Fronts Stretch Goals Set
The Formidable Fronts - Stretch Goals Set- includes all STLs (solid, hollowed and supported files) which were associated with our Formidable Fronts Crowd funding campaign. This set includes both the unlocked, and as a thank you, the stretch goals we didn't unlock during the campaign. Also inlcuded are Tank Trap add-ons for making your own pieces with added tank traps.
Our website www.hexhogtabletops.com
Hexhog Tabletops: Grimdark and Galactic Bases
USD 5.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Hexhog Tabletops: Landing Pad
USD 16.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Hexhog Tabletops: Damaged Trenches-FF Expansion⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
USD 29.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Hexhog Tabletops: Formidable Fronts Expansion Set
igital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
This zip file is the Hexhog Tabletop LLC Formidable Fronts release all files prefaced with FF-xxxxxx format. Files provided in standard, hollow, and hollow supported when applicable.
FF-A01-000000-v1 -> Single Tank Trap Flat No Inserts
FF-A02-000000-v1 -> Double Tank Trap Flat No Inserts
FF-A03-000000-v1 -> Triple Tank Trap Flat No Inserts
FF-A04-000000-v1 -> Quad Tank Trap Flat No Inserts
FF-BS2-111110-v1 Small Bunker Part B
FF-BS3-110000-v1 Small Bunker Part C
Files are grouped as follows:
hollow: Component files that have been pre-hollowed. 1.5mm to 2.5mm wall thickness, depending on interior geometry
hollow-supports: Component files that have been pre-hollowed and supported. 1.5mm-2.5mm wall thickness depending on interior geometry
standard: Standard files stls, no hollows, or printer type prep
Important: We strongly reccommend building hills one level at at time as the components are designed to fit snugly and trying to jam a piece in when pieces on layers above it are in place can be a frustrating adventure!
License for our files
Private Use Only
Non Commercial
No Derivatives distribution of any sort.
By downloading files from our MMF page, you are purchasing a non-distribution licence to use these files. You are not purchasing the intellectual property of the files nor the assets used in creating the files.
Do not under any circumstances share these files for free or commercially.
IMPORTANT: Rules, Terms and Conditions
All files and links we share with our backers are meant for you as supporter and no one else. By downloading content made by us (Stl files, Zips. etc), you accept this Agreement and agree to be bound by its provisions. If you do not accept or agree with these terms, do not download the content we provide:
Hexhog Tabletops LLC is the owner of the STL files. The STL files are copyrighted work belonging to Hexhog Tabletops LLC.
Hexhog Tabletops LLC grants you a non-transferable, non-exclusive license to use the files.
You may only use the content provided by us (Stl and their location Links) for personal use, and you are not allowed to distribute or sell them nor the prints.
You can cut/resize our files to fit better your printer or personal needs but you can't share those derivative works (along with the original files).
You can't edit our 3d Files (stl) or use portions of them to create new content for any sort of distribution, sale, or other disbursement.
Our models and miniatures, any other kind of 3d file we release or or portions of our files can't be used in any other project, Kickstarter, Patreon, or any other crowdfunding platform, website, or release.
You can't make molds of our models, reproduction or casting or any kind of mass production is prohibited.
You can take photos, make live streams and video with our printed files (ideally to Showing 3d printer results or painting examples or awesome battler reports!) as long as you state that the models have been made by us. In this case our MyMiniFactory Store / Campaign would be greatly appreciated. Also a courtesy cross-post on our discord channel is appreciated!
All copyrights belong to Hexhog Tabletops, No rights are assigned or transferred to the end-user. Our designs are protected by intellectual property laws.
Revision Notes
01_FF_Standard_v2.zip -> FF-U1-EDGCTL-V2, FF-V02-EDGEVTR-v2, FF-W01-EDGDTL-v2 corrections posted.
Please note: for the optimal gaming experience, having the files from Hinterland Hills is required (available as an add-on or through the Recruit Pledge). This Veteran pledge is designed for backers of Hinterland Hills only includes the files from Formidable Fronts. For all you previous backers of Hinterland Hills! This set is for all of your returning backers who really need to build some awesome bunker and trench installations! (Requires Hinterland Hills Openlock Technology) Formidable Fronts Deluxe includes the following add-ons and all Stretch goals. Includes: -Formidable Fronts Expansion Set - Landing Pad Add-on - Catastrophic Craters Add-on - Damages Fronts Add-on - Grimdark and Galactic Bases Add-on - All stretch goals unlocked during the campaign
128 pioneers
USD 61.00
Hexhog Tabletops: Formidable Fronts Expansion Set
igital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
This zip file is the Hexhog Tabletop LLC Formidable Fronts release all files prefaced with FF-xxxxxx format. Files provided in standard, hollow, and hollow supported when applicable.
FF-A01-000000-v1 -> Single Tank Trap Flat No Inserts
FF-A02-000000-v1 -> Double Tank Trap Flat No Inserts
FF-A03-000000-v1 -> Triple Tank Trap Flat No Inserts
FF-A04-000000-v1 -> Quad Tank Trap Flat No Inserts
FF-BS2-111110-v1 Small Bunker Part B
FF-BS3-110000-v1 Small Bunker Part C
Files are grouped as follows:
hollow: Component files that have been pre-hollowed. 1.5mm to 2.5mm wall thickness, depending on interior geometry
hollow-supports: Component files that have been pre-hollowed and supported. 1.5mm-2.5mm wall thickness depending on interior geometry
standard: Standard files stls, no hollows, or printer type prep
Important: We strongly reccommend building hills one level at at time as the components are designed to fit snugly and trying to jam a piece in when pieces on layers above it are in place can be a frustrating adventure!
License for our files
Private Use Only
Non Commercial
No Derivatives distribution of any sort.
By downloading files from our MMF page, you are purchasing a non-distribution licence to use these files. You are not purchasing the intellectual property of the files nor the assets used in creating the files.
Do not under any circumstances share these files for free or commercially.
IMPORTANT: Rules, Terms and Conditions
All files and links we share with our backers are meant for you as supporter and no one else. By downloading content made by us (Stl files, Zips. etc), you accept this Agreement and agree to be bound by its provisions. If you do not accept or agree with these terms, do not download the content we provide:
Hexhog Tabletops LLC is the owner of the STL files. The STL files are copyrighted work belonging to Hexhog Tabletops LLC.
Hexhog Tabletops LLC grants you a non-transferable, non-exclusive license to use the files.
You may only use the content provided by us (Stl and their location Links) for personal use, and you are not allowed to distribute or sell them nor the prints.
You can cut/resize our files to fit better your printer or personal needs but you can't share those derivative works (along with the original files).
You can't edit our 3d Files (stl) or use portions of them to create new content for any sort of distribution, sale, or other disbursement.
Our models and miniatures, any other kind of 3d file we release or or portions of our files can't be used in any other project, Kickstarter, Patreon, or any other crowdfunding platform, website, or release.
You can't make molds of our models, reproduction or casting or any kind of mass production is prohibited.
You can take photos, make live streams and video with our printed files (ideally to Showing 3d printer results or painting examples or awesome battler reports!) as long as you state that the models have been made by us. In this case our MyMiniFactory Store / Campaign would be greatly appreciated. Also a courtesy cross-post on our discord channel is appreciated!
All copyrights belong to Hexhog Tabletops, No rights are assigned or transferred to the end-user. Our designs are protected by intellectual property laws.
Revision Notes
01_FF_Standard_v2.zip -> FF-U1-EDGCTL-V2, FF-V02-EDGEVTR-v2, FF-W01-EDGDTL-v2 corrections posted.
Hexhog Tabletops: Damaged Trenches-FF Expansion⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
USD 29.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Hexhog Tabletops: Landing Pad
USD 16.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Hexhog Tabletops: Grimdark and Galactic Bases
USD 5.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Formidable Fronts Stretch Goals Set
The Formidable Fronts - Stretch Goals Set- includes all STLs (solid, hollowed and supported files) which were associated with our Formidable Fronts Crowd funding campaign. This set includes both the unlocked, and as a thank you, the stretch goals we didn't unlock during the campaign. Also inlcuded are Tank Trap add-ons for making your own pieces with added tank traps.
Our website www.hexhogtabletops.com
*This Early bird will end on 24th, July, 2021. 3pm UTC Please note: for the optimal gaming experience, having the files from Hinterland Hills is required (available as an add-on or through the Recruit Pledge). This Veteran pledge is designed for backers of Hinterland Hills only includes the files from Formidable Fronts. For all you previous backers of Hinterland Hills! This set is for all of your returning backers who really need to build some awesome bunker and trench installations! Formidable Fronts Deluxe includes the following add-ons and all Stretch goals. Includes: -Formidable Fronts Expansion Set - Landing Pad Add-on - Catastrophic Craters Add-on - Damages Fronts Add-on - Grimdark and Galactic Bases Add-on - All stretch goals unlocked during the campaign
6 of 20 pioneers
USD 450.00
Formidable Fronts Stretch Goals Set
The Formidable Fronts - Stretch Goals Set- includes all STLs (solid, hollowed and supported files) which were associated with our Formidable Fronts Crowd funding campaign. This set includes both the unlocked, and as a thank you, the stretch goals we didn't unlock during the campaign. Also inlcuded are Tank Trap add-ons for making your own pieces with added tank traps.
Our website www.hexhogtabletops.com
Hexhog Tabletops: Rambling Road - Expansion Set -
USD 16.99
Rambling Roads - Expansion
With this expansion you can build your modular roads into your area terrain to entire tables.
Includes 10 highly detailed sculpts, 2 with asymmetrical geometry and supplied mirrored. Delivered as a set of over XX files.
This set is an expansion and will need Hinterland Hills - Core Set - (sold seperately) to be used to as it is intended.
Currently available for separate purchase: Hinterland Hills: Core Set, Calamitous Crags and Cliffs: Expansion
Hexhog Tabletops: Calamitous Crags and Cliffs - Expansion Set -
USD 16.99
This zip file is the Hexhog Tabletop LLC Calamitous Cliffs & Crags release all files prefaced with CC-xxxxxx formatAll files provided as whole and cut into top and bottom fro smaller print bed support.
CC-B01-200000-v1 -> 1 point double rise hex.
CC-C01-220000-v1 -> 2 point double rise hex.
CC-D01-222000-v1-> 3 point double rise hex.
CC-E01-222200-v1 -> 4 point double rise hex.
CC-G01-210000-v1-> 1 Point double rise, 1 point single rise hex.
CC-G01-210000m-v1-> 1 Point double rise, 1 point single rise hex. (Mirror)
CC-H01-221000-v1 ->2 points double rise, 1 point single rise hex.
CC-H01-221000m-v1 ->2 points double rise, 1 point single rise hex. (Mirror)
CC-J01-221001-v1 -> 2 point double rise, 1 point single rise, 1 point single rise
CC-J01-221001m-v1 -> 2 point double rise, 1 point single rise, 1 point single rise (Mirror)
CC-M01-LNGSTP-v1 -> Double Rise long side step
CC-M01-LNGSTPm-v1 -> Double Rise long side step. (Mirror)
CC-N01-221101-v1 -> 2 point, double rise, single ris, two point single rise
CC-N01-221101m-v1 -> 2 point double rise, single ris, two point single rise (Mirror)
CC-T01-SRTSTP-v1 -> Double Rise short side step.
CC-T01-SRTSTPm-v1 -> Double Rise short side step. (Mirror)
Files are grouped as follows:
hollow: Component files that have been pre-hollowed. 1.5mm wall thickness.
hollow-supports: Component files that have been pre-hollowed and supported. 1.5mm wall thickness.
standard: Standard files stls, no hollows, or printer type prep
Important: We strongly reccommend building hills one level at at time as the components are designed to fit snugly and trying to jam a piece in when pieces on layers above it are in place can be a frustrating adventure!
License for our files
Private Use Only
Non Commercial
No Derivatives distribution of any sort.
By downloading files from our MMF page, you are purchasing a non-distribution licence to use these files. You are not purchasing the intellectual property of the files nor the assets used in creating the files.
Do not under any circumstances share these files for free or commercially.
IMPORTANT: Rules, Terms and Conditions
All files and links we share with our backers are meant for you as supporter and no one else. By downloading content made by us (Stl files, Zips. etc), you accept this Agreement and agree to be bound by its provisions. If you do not accept or agree with these terms, do not download the content we provide:
Hexhog Tabletops LLC is the owner of the STL files. The STL files are copyrighted work belonging to Hexhog Tabletops LLC.
Hexhog Tabletops LLC grants you a non-transferable, non-exclusive license to use the files.
You may only use the content provided by us (Stl and their location Links) for personal use, and you are not allowed to distribute or sell them nor the prints.
You can cut/resize our files to fit better your printer or personal needs but you can't share those derivative works (along with the original files).
You can't edit our 3d Files (stl) or use portions of them to create new content for any sort of distribution, sale, or other disbursement.
Our models and miniatures, any other kind of 3d file we release or or portions of our files can't be used in any other project, Kickstarter, Patreon, or any other crowdfunding platform, website, or release.
You can't make molds of our models, reproduction or casting or any kind of mass production is prohibited.
You can take photos, make live streams and video with our printed files (ideally to Showing 3d printer results or painting examples or awesome battler reports!) as long as you state that the models have been made by us. In this case our MyMiniFactory Store / Campaign would be greatly appreciated. Also a courtesy cross-post on our discord channel is appreciated!
All copyrights belong to Hexhog Tabletops, No rights are assigned or transferred to the end-user. Our designs are protected by intellectual property laws.
Revision Notes
Hexhog Tabletops: Hinterland Hills - Core Set -
USD 44.99
Hinterland Hills - Core Set
With this set you can build your modular terrain to create scatter hills to entire tables.
Includes 51 highly detailed sculpts, 2 with asymmetrical geometry and supplied mirrored. Delivered as a set of 171 files.
In this set you get all files associated with Hinterland Hills portion of the original kickstarter.
Expansions sold separately. Currently available for seperate purchase: Calamitous Crags and Cliffs; Rambling Roads
Hexhog Tabletops: Grimdark and Galactic Bases
USD 5.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Hexhog Tabletops: Landing Pad
USD 16.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Hexhog Tabletops: Damaged Trenches-FF Expansion⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
USD 29.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
Hexhog Tabletops: Formidable Fronts Expansion Set
igital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
This zip file is the Hexhog Tabletop LLC Formidable Fronts release all files prefaced with FF-xxxxxx format. Files provided in standard, hollow, and hollow supported when applicable.
FF-A01-000000-v1 -> Single Tank Trap Flat No Inserts
FF-A02-000000-v1 -> Double Tank Trap Flat No Inserts
FF-A03-000000-v1 -> Triple Tank Trap Flat No Inserts
FF-A04-000000-v1 -> Quad Tank Trap Flat No Inserts
FF-BS2-111110-v1 Small Bunker Part B
FF-BS3-110000-v1 Small Bunker Part C
Files are grouped as follows:
hollow: Component files that have been pre-hollowed. 1.5mm to 2.5mm wall thickness, depending on interior geometry
hollow-supports: Component files that have been pre-hollowed and supported. 1.5mm-2.5mm wall thickness depending on interior geometry
standard: Standard files stls, no hollows, or printer type prep
Important: We strongly reccommend building hills one level at at time as the components are designed to fit snugly and trying to jam a piece in when pieces on layers above it are in place can be a frustrating adventure!
License for our files
Private Use Only
Non Commercial
No Derivatives distribution of any sort.
By downloading files from our MMF page, you are purchasing a non-distribution licence to use these files. You are not purchasing the intellectual property of the files nor the assets used in creating the files.
Do not under any circumstances share these files for free or commercially.
IMPORTANT: Rules, Terms and Conditions
All files and links we share with our backers are meant for you as supporter and no one else. By downloading content made by us (Stl files, Zips. etc), you accept this Agreement and agree to be bound by its provisions. If you do not accept or agree with these terms, do not download the content we provide:
Hexhog Tabletops LLC is the owner of the STL files. The STL files are copyrighted work belonging to Hexhog Tabletops LLC.
Hexhog Tabletops LLC grants you a non-transferable, non-exclusive license to use the files.
You may only use the content provided by us (Stl and their location Links) for personal use, and you are not allowed to distribute or sell them nor the prints.
You can cut/resize our files to fit better your printer or personal needs but you can't share those derivative works (along with the original files).
You can't edit our 3d Files (stl) or use portions of them to create new content for any sort of distribution, sale, or other disbursement.
Our models and miniatures, any other kind of 3d file we release or or portions of our files can't be used in any other project, Kickstarter, Patreon, or any other crowdfunding platform, website, or release.
You can't make molds of our models, reproduction or casting or any kind of mass production is prohibited.
You can take photos, make live streams and video with our printed files (ideally to Showing 3d printer results or painting examples or awesome battler reports!) as long as you state that the models have been made by us. In this case our MyMiniFactory Store / Campaign would be greatly appreciated. Also a courtesy cross-post on our discord channel is appreciated!
All copyrights belong to Hexhog Tabletops, No rights are assigned or transferred to the end-user. Our designs are protected by intellectual property laws.
Revision Notes
01_FF_Standard_v2.zip -> FF-U1-EDGCTL-V2, FF-V02-EDGEVTR-v2, FF-W01-EDGDTL-v2 corrections posted.
Commercial License level pledge will include all STL files found in the New Recruit Deluxe level and all unlocked stretch goals . The licence will be valid until 12/31/2023 and permits the licensee to sell physical unedited 3d prints of the files included. The selling or distribution of digital files is NOT permitted under any circumstance and the license is non-transferable. We will assign a commercial seller id number and provide a logo watermark to be included on all images when marketing online upon request. Includes: - Formidable Fronts - Expansion - Hinterland Hills - Core Set - (From our first KS) - Calamitous Crags and Cliffs - Expansion - (From our first KS) - RamblingRoads - Expansion -(From our first KS) - Landing Pad Add-on - Craters Add-on - Damages Fronts Add-on - Grimdark and Galactic Bases Add-on - All stretch goals unlocked during the campaign
Add-ons
USD 29.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
USD 16.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
USD 5.99
COMING SOON! Digital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
USD 44.99
Hinterland Hills - Core Set
With this set you can build your modular terrain to create scatter hills to entire tables.
Includes 51 highly detailed sculpts, 2 with asymmetrical geometry and supplied mirrored. Delivered as a set of 171 files.
In this set you get all files associated with Hinterland Hills portion of the original kickstarter.
Expansions sold separately. Currently available for seperate purchase: Calamitous Crags and Cliffs; Rambling Roads
USD 16.99
This zip file is the Hexhog Tabletop LLC Calamitous Cliffs & Crags release all files prefaced with CC-xxxxxx formatAll files provided as whole and cut into top and bottom fro smaller print bed support.
CC-B01-200000-v1 -> 1 point double rise hex.
CC-C01-220000-v1 -> 2 point double rise hex.
CC-D01-222000-v1-> 3 point double rise hex.
CC-E01-222200-v1 -> 4 point double rise hex.
CC-G01-210000-v1-> 1 Point double rise, 1 point single rise hex.
CC-G01-210000m-v1-> 1 Point double rise, 1 point single rise hex. (Mirror)
CC-H01-221000-v1 ->2 points double rise, 1 point single rise hex.
CC-H01-221000m-v1 ->2 points double rise, 1 point single rise hex. (Mirror)
CC-J01-221001-v1 -> 2 point double rise, 1 point single rise, 1 point single rise
CC-J01-221001m-v1 -> 2 point double rise, 1 point single rise, 1 point single rise (Mirror)
CC-M01-LNGSTP-v1 -> Double Rise long side step
CC-M01-LNGSTPm-v1 -> Double Rise long side step. (Mirror)
CC-N01-221101-v1 -> 2 point, double rise, single ris, two point single rise
CC-N01-221101m-v1 -> 2 point double rise, single ris, two point single rise (Mirror)
CC-T01-SRTSTP-v1 -> Double Rise short side step.
CC-T01-SRTSTPm-v1 -> Double Rise short side step. (Mirror)
Files are grouped as follows:
hollow: Component files that have been pre-hollowed. 1.5mm wall thickness.
hollow-supports: Component files that have been pre-hollowed and supported. 1.5mm wall thickness.
standard: Standard files stls, no hollows, or printer type prep
Important: We strongly reccommend building hills one level at at time as the components are designed to fit snugly and trying to jam a piece in when pieces on layers above it are in place can be a frustrating adventure!
License for our files
Private Use Only
Non Commercial
No Derivatives distribution of any sort.
By downloading files from our MMF page, you are purchasing a non-distribution licence to use these files. You are not purchasing the intellectual property of the files nor the assets used in creating the files.
Do not under any circumstances share these files for free or commercially.
IMPORTANT: Rules, Terms and Conditions
All files and links we share with our backers are meant for you as supporter and no one else. By downloading content made by us (Stl files, Zips. etc), you accept this Agreement and agree to be bound by its provisions. If you do not accept or agree with these terms, do not download the content we provide:
Hexhog Tabletops LLC is the owner of the STL files. The STL files are copyrighted work belonging to Hexhog Tabletops LLC.
Hexhog Tabletops LLC grants you a non-transferable, non-exclusive license to use the files.
You may only use the content provided by us (Stl and their location Links) for personal use, and you are not allowed to distribute or sell them nor the prints.
You can cut/resize our files to fit better your printer or personal needs but you can't share those derivative works (along with the original files).
You can't edit our 3d Files (stl) or use portions of them to create new content for any sort of distribution, sale, or other disbursement.
Our models and miniatures, any other kind of 3d file we release or or portions of our files can't be used in any other project, Kickstarter, Patreon, or any other crowdfunding platform, website, or release.
You can't make molds of our models, reproduction or casting or any kind of mass production is prohibited.
You can take photos, make live streams and video with our printed files (ideally to Showing 3d printer results or painting examples or awesome battler reports!) as long as you state that the models have been made by us. In this case our MyMiniFactory Store / Campaign would be greatly appreciated. Also a courtesy cross-post on our discord channel is appreciated!
All copyrights belong to Hexhog Tabletops, No rights are assigned or transferred to the end-user. Our designs are protected by intellectual property laws.
Revision Notes
USD 16.99
Rambling Roads - Expansion
With this expansion you can build your modular roads into your area terrain to entire tables.
Includes 10 highly detailed sculpts, 2 with asymmetrical geometry and supplied mirrored. Delivered as a set of over XX files.
This set is an expansion and will need Hinterland Hills - Core Set - (sold seperately) to be used to as it is intended.
Currently available for separate purchase: Hinterland Hills: Core Set, Calamitous Crags and Cliffs: Expansion
Hexhog tabletops is excited to invite you to back for our first expansion, Formidable Fronts - Intricate and detailed modular hex designs for you to print and build futuristic battlefronts. This set expands on our original release, Hinterland Hills, which is made available again as part of this campaign in case you missed it, as the Core Set is *required* for these expansion designs.
Warm up your printers and prepare to build modular hill entrenchments or complete tables of grim futuristic battlefronts. This is a fully digital crowdfunding campaign and all files come ready for both FDM and resin printers.
Building modular stand-alone hills was the design inspiration of the Hexhog Tabletop System. With Formidable Fronts we are expanding the options to build and vary area terrain options to set on top of your tabletop or gaming mat. This makes it easy to start printing and build functional terrain. As you continue to print and grow your collection your options will grow too. Start with small stand alone hills, move to larger stand alone pieces, and when you are ready go for the complete tabletop build out.
Area terrain using the Formidable Fronts Expansion, Hinterland Hills Core Set, and Calamitous Crags and Cliffs.
A 4x4 tabletop using Hinterland Hills Core Set and Calamitous Crags and Cliffs.
Formidable Fronts has over 50 individual detailed design components allowing you to build trenches, bunkers, and new hill structures when combined with the designs released in Hinterland Hills Core Set. Formidable Fronts is compatible with all previous releases.
The following are the components in the Formidable Fronts Expansion for building trenches in your tabletop creations.
The following are the components in the Formidable Fronts Expansion for building a small and large bunker in your tabletop creations.
As part of this release we have added two new edge designs give greater flexibility when you create diverse modular hills. Additionally, we have a new riser component that can be interspersed with our original HT-AZ1 riser to reduce your print time in big builds.
We spend a lot of time showing off our total tables, but we always like to remind people about the great stand alone options that require much less piece and print time investment. Don't forget our build guides from our first campaign as great introductions of what you can print to get a few modular stand alone terrain options on the table and with the new edges you get even more variation.
Our new tall edges will create line-of-sight blocking hills from fewer parts and allow your hills to reach into the sky. The new transition edges ensure smooth compatibility from the new tall edges to the original low edges in the Hinterland Hills Core Set.
Below we are listing all the add-ons, both new and old, available in this campaign. Please note we have set up reward tiers that include all of these add-ons. At the same time we want to make sure we provide the flexibility to all our backers to select just what you may want and need if you aren't interested in the large sets, but please note all stretch goals are associated only with our bundle pledges.
Catastrophic Craters is a collection of designs allowing you to add that bombarded battlefield appearance. From our large four-hex single crater, to single craters with multiple impacts this set will give some great flavor to your tabletop.
The complete crater build out from the various designs.
The following are the components in the Catastrophic Craters Add-On for building various crater designs to pock-mark your tabletop with.
What better way to ensure your frontlines are well supported than a landing pad? With this add-on you will get the components to build modular landing pads. We have three designs we have found and are excited to see what designs you come up with, but the options abound with these designs.
We are very excited to provide damaged trench and bunker expansion add-on components to allow even further variation to your Hexhog Tabletop creations. Included in this are three varied crater backs, left and right trench components (which can be mirrored), turns, and Y intersections.
As a lot of our community backs other great miniature creators we wanted to get some themed bases developed for those that wanted to put other minis onto thematic bases for two of the bigger games we hear our designs are used for.
What is a campaign without stretch goals? We hope to unlock all of these as the campaign progresses.
Our original release Hinterland Hills - Core Set, Calamitous Cliffs & Crags Expansion Set, and Rambling Road Expansion Set are all available as add-ons as part of this campaign. All stretch goals from the original campaign has been integrated into these add-ons. If you are thinking about getting all of these make sure you find the appropriate reward to get a discount on the bundle of new and old releases and don't add them individually. The Core Set provides you with the foundational system and basic designs that with the two expansions allow one to make scatter terrain, tabletops, or encounter tables as in the video below.
In our first campaign we released some build guides and want to make those available for you to use. Click Here to see them on our webpage. Please note Build Guide 1 will need Hinterland Hills Core Set, Build Guide 2 needs Hinterland Hills and Calamitous Crags & Cliffs, and the Encounter Table Guide will need all three original releases.
Hinterland Hills - Core Set released designs to build basic area terrain and tabletops that can step up in single level rises of ~28mm steps. The Core Set has all key parts of the Hexhog Tabletop System and detailed terrain pieces.
Calamitous Cliffs & Crags - Expansion provides designs to step up two levels in a single hex (~56mm) including table edge pieces. With this set the ability to gain elevation is doubles as you grow your tabletop creations upwards from the play surface.
Rambling Roads - Expansion provides stone roadway hex designs for your table needs. With both hexes that are flat and change elevation, you should be able to create many different roadways to take you on far and wide rambling adventures.
Digital files purchased as part of this campaign and all stretch goals included in delivery are licensed under a strict non-commercial, personal use only license. You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used in any way whatsoever in which you charge money, collect fees, or receive any form of remuneration.
We are very appreciative of all those who have supported us in the past and are continue to adventure with us with this release. If you have questions or concerns please feel free to bookmark these contact methods and reach out when needed.
- Follow us on our discord channel
- visit our website www.hexhogtabletops.com
- Email us info@hexhogtabletops.com
- Message us through Facebook
We are three hobby focused gamers and creators who have put together the Hexhog venture while working our day jobs, so often our responses will be early in the AM or late in the evening Pacific time.
Hexhog Tabletops is excited to be partnering again with MyMiniFactory on our digital fulfillment.
Simple. Instant. Specialized. The MyMiniFactory Pledge Manager is designed for seamless STL file fulfillment. Once released, gain instant access to your pledge, enjoy upgrade options and even purchase additional add-ons as they’re released.
None of the hassle of 3rd party digital downloads. No fear of expiring links. Plus the opportunity to make a late pledge if life was too hectic to catch our Kickstarter before the funding deadline.
How it works.
- Login to your MyMiniFactory account through the link emailed to you from MyMinifactory - or register through the private link.
- Click on “My Library” from your profile.
- Your pledges will be automatically and instantly accessible through the “Objects Shared with me” collection of your library.
- You can view the campaign, upgrade your pledge or add on through the “Campaign” section of your library where our pledge manager will live.
We are frequently asked what to do if one doesn't have 3d printer? At this time we are not fulfilling any physical options, though we have had a some people purchase rights for physical delivery.
We strongly encourage that if you are into any sort of miniature hobbies that you think about getting the appropriate printer for you. Not for this campaign (but hey we won't stop you!) but strictly to take advantage of all the amazing designs for purchase and free that are available.
We can't recommend any specific printer but will say if you want to print mostly large terrain or items at a cheaper material cost looking into a FDM / extrusion printer. If you want to print smaller volume and high details, have the space, and can deal with resin clean up, look into a resin printer. Make sure you do your research but options keep getting more affordable every year. For note we print all our test pieces on a Prusa MK3 and a Elegoo Mars.
Where can I find my discount code?
If you are eligible for redeeming a discount code* (early sign-ups), the discount code can be found in:
- Your MyMiniFactory
Inbox
- MyMiniFactory Newsletter or email*
*If you believe that you should have received a discount code, please check your junk email.
I have made a Pledge, when will I receive the files?
You will receive the Formidable Fronts files after the Crowdfunding campaign has ended. Further updates regarding the release date will be announced by Hexhog. You will be notified via email or an update when the files are available for download in your MyMiniFactory Inbox.
Hinterland Hills files will be available upon completion of the purchase of the New Recruit pledge levels.
Formidable Fronts files will be distributed within 2 weeks after the end of the campaign funding period finishes.
When will I be charged?
You will be charged immediately after a pledge has been made or an add-on has been purchased. You can review your order on the Order Details page.
How can I upgrade my pledge?
Pledges can be upgraded easily by selecting any higher tier pledge. By doing so, the price you see at checkout will only show the difference in price for the pledge upgrade.
I would like to cancel my pledge and get a refund, what should I do?
If you want to request a refund for your purchase of a digital product, the request has to be made within 14 days after the purchase and before the file release. Please reach out to MyMiniFactory via the Contact Us Page.
Please note: MyMiniFactory only provides the platform upon which payments between customers and creators are made. Customers will need to contact the creator to request a refund if having problems with the digital product.
You can reach out to the creator by leaving a message in the comment section or reach out to a designer by selecting “Private Message” on their public profile, or as otherwise stated on this page.
Please note, once the refund is issued, you may lose access to purchases, downloads, content, or future updates.
What are Stretch Goals? Are these STLs included in the pledges?
Stretch goals will be unlocked when the campaign reaches a certain amount of the total funding. If your pledge level includes stretch goals (Deluxe Editions), you will receive all the unlocked files at the end of the campaign. To discover all stretch goals you can see them here.
Where can I review the pledge that I purchased?
You can review your pledge under the ‘Pledge’ tab of the campaign. Your files can be found in your library (under ‘campaigns’) on MyMiniFactory or Order Details page.
Where can I change the setting of Notifications?
You can update your notifications settings in Settings > Notifications
By default, you will only receive a notification if you leave a comment and another user replies to your comment.
If you want to edit your notifications settings, please click all the boxes under the “Crowdfunding” section in your Settings > Notifications
How will I know if there’s a new campaign update?
When there’s a new update from the designer, it can be found under the “Updates” section of the campaign. Backers will also receive a notification when an “Update” is published.
You can also comment on Updates by selected “Read More > View on Community Stories” at the footer of each update.
I have questions about the files, who can I reach out to?
If you have any further questions about the content in a pledge, please reach out to the creator of the campaign, or leave a comment in the Comments section.
I need assistance with my payment or other issues, what can I do?
Please Contact Us if you have any issues with payment. Once we receive the ticket we will get back to you in 3-5 business days.
Commercial License
There is a Commercial License Pledge available. Commercial License level pledge will include all STL files found in the New Recruit Deluxe level and all unlocked stretch goals . The licence will be valid until 12/31/2023 and permits the licensee to sell physical unedited 3d prints of the files included. The selling or distribution of digital files is NOT permitted under any circumstance and the license is non-transferable.
We will assign a commercial seller id number and provide a logo watermark to be included on all images when marketing online upon request.
Thank you for supporting Hexhog and the 3D Printing Community!
Please update your notification settings if you want to get notified when there is a new comment.