Straight Track Garden Railway System 45mm Gauge
Straight Track Garden Railway System 45mm Gauge
3D
Published 2017-05-15T18:05:58+00:00
On public request comes track in 45mm gauge.
Straight track for 45mm gauge tracks , common used in Garden railways (16mm and LGB).
The length off the tracks are made so they are printable on most 3D-printers.
There are track holders for printed sleepers och wooden sleepers.
There are STL files for complete track, track you assemble by your self and complete track for dual extruder printers.
My goal is to release all track already released in 32mm gauge in 45mm gauge.
It should be easy to print this track, and you only need support on the complete tracks.
Dual extruder tracks aren't test printed yet, but seems Ok in Cura.
All STL files has been tested in Netfabb.
All "Dual" STL are for dual extruder print.
Template are for easy assembly.
I have printed my tracks with PLA at 0.3mm layer height and 30-50% infill. (30% is enough, 50% is on the safe side)
| Date published | 15/05/2017 |
| Technologie | FDM |
| Schwierigkeitsgrad | Easy |