45mm Turnout for Garden Railway Track System
45mm Turnout for Garden Railway Track System
3D
Published 2017-05-15T18:04:56+00:00
After att total rebuild off my Turnout 32mm it's finally here.
Turnout for 45mm gauge tracks (SM45) common used in Garden railways (16mm and LGB scale).
The turnout radius are 1150mm and a steeper radius curved track is included .
I will be very glad if you publish pictures off your printings.
It should be easy to print, and it's around a total 10 hour print for one turnout.
Decide if you want to print left or right turnout and print one of each L or R part files . Part 5 are the same for both L or R.
All STL files has been tested in Netfabb.
I have printed my turnouts with PLA at 0.3mm layer height and 30% infill .
Part 4 STL:s are printed with 0.2mm layer height.
All files named dual_**** are for dual printing, files 4 and 5 are the same as normal printing.
| Date published | 15/05/2017 |
| Technologie | FDM |
| Schwierigkeitsgrad | Easy |