5x5 Puzzle Cylinder
3D
UPDATE (5/25/2018): I have attached exploded assembly pictures to help in solving if help is needed
UPDATE (6/28/2018): The "g" piece was not sitting flat as oriented in the .stl file. "g_fixed" .stl has been uploaded and the original "g" .stl has been removed.
My daughter wanted a harder puzzle than the 3x3 Puzzle Cylinder I posted recently, so here it is.......which is a LOT harder! The general concept is the same as puzzle cubes but with the obvious difference being cylindrical instead of a cube. A stand is also included to help with holding the pieces together while you solve it and for use as a display stand. Each piece has been uploaded separately, as well as a nested file of all the puzzle pieces that will fit on a 200mm x 200mm print bed. I noticed while testing this out that the rounded faces help with identifying where pieces could possibly fit.
This is an entry for the MakeAnything Challenge.
.3 layer height
15% infill
60mm print speed
I printed stand with no support which works fine if using PLA and have a good cooling fan.
| Date published | 18/05/2018 |
| Dimensionen | 91mm x 67mm x 63mm biggest part |
| Technologie | FDM |
| Schwierigkeitsgrad | Easy |
| Support Free | YES |
Every single piece is printed in a different color/material. We've got 'glow in the dark,' glitter, terracotta stone, super shiny polyester and more!