AECAVE01 - Swole Caverns
$1.00 AECAVE01 - Swole Caverns
Published 2021-03-01T10:22:55+00:00
This set goes out to all our MMF Tribes subscribers, $2 and up.
This set, Swole Caverns, is one that has been long requested but rarely on workscreen. We had long wanted to make our own mark of caverns, but we wanted to make something unique. This set continues the work of AECAVE0 - Rich Caverns and integrates fully with those models. It is also where the name comes from. Rich Caverns required 9 separate zip files for the archaic software of DTRPG. As such, to add anymore would have swollen it beyond the ability of their Apple 2e based servers to handle. Swole'd over with so many new models, we instead decided to make it our first major expansion of the AECAVE series. We went back to our roots to integrate the work original Aether Caves 1 set of scatter columns and stalagmites, in addition to many new models we hope you enjoy.
The terrain in this set was originally sculpted by Carl Csurgo and Will Walker, with a lot of help from Patrick Strobbe and Colin Christenson.
This series is just getting started. We included a handful of fungal caves in this set, but we are saving the mother lode for the next releases. You can count on Aether Studios to continue making the finest cavern tiles ever released.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
Date published | 01/03/2021 |
Price | $1.00 |
Support Free | YES |
This new cavern set prints well lots of variations.