Apple Shaped Candy Dispenser
Apple Shaped Candy Dispenser
Published 2019-08-20T18:16:45+00:00
Don't forget to check out my other Free and Premium designs!
-------
This novelty candy dispenser is shaped as a large apple and is a great hiding spot to hide your favorite small candies from from friends, family, and other would be candy thieves or to give out as a unique gift for teachers. Designed as a print in place, the apple candy dispenser can be printed support free. Insert candies up to 1cm in diameter through the top of the stem. Turn the stem 90 degrees to open the bottom of the apple to have the candy come out.
About this design:
Print 0.3 mm with 15% fill with a 0.4 mm nozzle. Print without print supports with speeds between 45 mm/s - 60mm/s. Recommended to use a food friendley filament with a stainless steel nozzle.
Print 0.3 mm with 15% fill. Print has only been tested on printers with a 0.4 nozzle. Print without supports with speeds between 45 mm/s - 60mm/s.
Date published | 20/08/2019 |
Benoetigte Zeit | 280 - 480 Minuten |
Dimensionen | 94.40 mm x 94.40 mm x 93.66 mm |
Support Free | YES |