Avatar Toph 3D print version
Avatar Toph 3D print version
3D
Published 2022-05-12T08:15:34+00:00
Hello,
i made this model 9 months ago and someone asked me to prepare it for 3D printing. I have done some models for 3D printing but if you find some errors or problems let me know. More renders in 3D here
I printed it with an FDM printer with an upscale of 390. There is a full body file included so you can figure out the scale factor for yourself depending on how big you want it to be.
Printed on an Ender 3 V2 and the figure is with base around 26 cm heigh or 10 inches
Whats in it:
- Two version of the head. Normal and one with thicker hair tips for easier FDM printing.
- Upper Body
- Lower Body
- two different bases
Some tips:
- rotate the head (around) 180 degress for printing. You need less support and the face will be cleaner.
- not an expert here but prusa slicer had way shorter print times than cura 5.
IF YOU PRINT IT IN RESIN PLEASE POST SOME PICTURES!
Model is made with blender and the design is from Avatar the last Airbender.
| Date published | 12/05/2022 |