Batgirl Statue Bust
Batgirl Statue Bust
3D
Published 2019-08-12T08:15:11+00:00
Sculpted in zBrush. Bust and base are keyed separate shells and base is available as a separate 3D object.
I recently bought an Elegoo Mars and decided to print just the bust as my first test print. Other than an unnecessary auto generated support that was under her left bottom eyelash that removed a part of it when I tried to clip it off I could not be happier with the result. For you Mars users I used the exact same print settings as the test rook model that comes with the printer. Supports and sliced with Chitubox v1.5.0 and print time just under 6 hours.
Printer: Elegoo Mars
Rafts: Yes
Supports: Yes
Resolution: .05
Infill: Solid
Filament: Elegoo Photopolymer Resin Resin Grey
Notes:
Print settings on Elegoo Mars (used the same settings as the test rook model):
Layer Height: 0.05
Bottom Layer Count: 5
Exposure Time: 7s
Bottom Exposure Time: 65s
Light-off Delay: 0s
Bottom Light-off Delay: 0s
Bottom Lift Distance: 5mm
Lifting Distance: 5mm
Bottom Lift Speed: 90mm/min
Lifting Speed: 300 mm/min
Retract Speed: 300 mm/min
Total print time: 5h58m9s
| Date published | 12/08/2019 |
Printed model with a 0.8mm thick shell and custom supports