Bigbore Shocks Tunning
Bigbore Shocks Tunning
3D
Published 2021-06-03T08:23:23+00:00
These are Cup Spring options to use small springs on Traxxas Bigbore shocks. Also, the spacer can be use to tune the shock to reduce shock travel in compression or strech.
To reduce compression: can add spacers outside of the shock, on the pinion.
To reduce stretch: add spacers inside the shock by removing the pinion and adding spacers before the pinion ring. Spacers will not be visible, as they will stay inside the shock housing reducing full stretch.
The spacer is 1mm in width, but you can print by stretching them to any length you want. For example, in the picture, I printed 10mm, 12mm, and 14mm to use in my front shock to reduce stretch to keep the front of the rig low.
| Date published | 03/06/2021 |
| Support Free | YES |