Bit holder for 10 6.5mm bits with space for magnets and hole for split ring
Bit holder for 10 6.5mm bits with space for magnets and hole for split ring
3D
Published 2019-09-25T10:30:12+00:00
A bit holder for 10 standard size 6.5mm bits. Has a hole for attaching it to a split ring and spots for 5 4mm diameter and 2.8mm high disc magnets which can be purchased very cheaply from aliexpress. Plugs wer created with very little clearance to allow for a secure friction fit to avoid reliance on glue. If you run into issues, scale the two axes with the interference layers down.
Print 5 of the plug pieces.
Print the main part at 105% if you are printing it in a non-flexible material
Get the strongest Magnets you can find, otherwise the bits will fall out if you scale it to 105%
Print it standing on its side. The undersides of the holes facing the build plate may need supports.
| Date published | 25/09/2019 |
| Menge an Filament | ~20g |