Candle stand - wave design
Candle stand - wave design
3D
Published 2014-12-23T23:48:31+00:00
An elegant candle stand inspired by a curving wave design.
Print a pair in silver or gold for a wonderful festive display!
Print as tall as your printer will allow - only scale on the z axis if possible.
Prints well at 0.3mm resolution, but higher res will give you a smoother surface finish. The interior is hollow to allow faster print times, but if you like a 'weighty' feel to your candle holders, fill the interior with sand and 'blank off' the base.
No supports or raft needed.
Enjoy!
DISCLAIMER/WARNING: Please don't let small children play with this lit item or put it in a location where it could be easily knocked over.
Print at 0.2 mm layer height, with 10% infill. This uses 90 g of filament and takes 613 minutes.
| Date published | 23/12/2014 |
| Benoetigte Zeit | 613 - 623 Minuten |
| Menge an Filament | 90 g |
| Dimensionen | 101 x 99 x 200 mm |
