Clay Texas Star Rotating Axis Joint
Clay Texas Star Rotating Axis Joint
3D
Published 2018-01-04T15:57:23+00:00
This is a rotating axis joint I designed for a Texas star clay target (for 5 clay). It's designed to utilize 2 22mm skateboard bearings. The wood sticks can be found at home depot (or any other hardware store) and measure roughly 14mm X 17.5mm. The clay holders can be found at this link https://www.thingiverse.com/thing:2369862. This was printed on a Maker Select v2 @ 215°c with 1.2mm walls and top/bottom.
I have added end caps and the skeet holder with a loop in the back for a zip tie. I am working on a zip tie-less design. You can also use the end caps on a stick and stick them vertically into the ground to have standing skeet targets.
For best results scale up 1%! Happy shooting!!
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
No
Infill:
15%
| Date published | 04/01/2018 |
| Technologie | FDM |
| Schwierigkeitsgrad | Easy |