Coffee Tamper
1,790
views
126
downloads
Add to collection
28
0
0 comments
Loading comments... 
Coffee Tamper
Published 2018-01-22T16:54:31+00:00
Description
This is a small coffe tamper i made for my capuchino machine, it has a 49.3 diameter in the top of the stamp, (which is like .2mm smaller than the cup itself) you can scale it on the X and Y axis to make it fit nicely.
i suggest using a higher infill for the handle, i printed mine with 50% on the stamp and 80% on the handle with two separated procesess on S3D.
Just as i printed it i went to test it worked perfectly, a friend's dog tought it was a toy and breaked it, i fixed it with a handle from a bathroom door, thats why i have no real 3D printed photos.
Printing Details
Easy to print. Only tip is enable 5+ layers of top fill to avoid gaps.
Technical Information
| Date published | 22/01/2018 |
| Benoetigte Zeit | 42 - 110 Minuten |
| Menge an Filament | 19 g |
| Dimensionen | 50mm x 50mm x 65mm |
| Technologie | FDM |
| Schwierigkeitsgrad | Easy |
| Support Free | YES |
Object Parts
