CR-10-Mini Legs for Aluminium Profile
CR-10-Mini Legs for Aluminium Profile
Published 2018-04-24T10:10:09+00:00
EDIT 07/01/18
Since i put the 120mm Fan Base
https://www.thingiverse.com/thing:2729888
under my controlbox i need some higher Foots. So i added them (the ones with 4 holes)
This is a leg for my CR-10 Mini, so you can put the Control-Box under the Printer. It mounts screwless into the Aluminium-Profile and you also do not have to remove the original Feets.
Maybe, when you have a slippery desk, you have to put some rubber under the feets.
And since they are not screwed, its possible, that they turn over when an impact is hard enough, so do not use them (or secure them with zip-ties) if you have small children, cats or dogs in your room, where your printer is
And yes, you have to print 4 of them ;)
Designed in Tinkercad
Please leave a Like or a comment, thank you!
Printed On a CR-10 Mini with no Supports
Resolution: 0,28
Infill: 20%
Ive printed them with 0,28mm resolution, 80mm/s and PLA
Date published | 24/04/2018 |
Benoetigte Zeit | 240 - 300 Minuten |
Menge an Filament | 125g per Leg (4 needed) |
Dimensionen | 50x50x175 |
Technologie | FDM |
Schwierigkeitsgrad | Easy |
Support Free | YES |