DinoByte (Cable keeper)
DinoByte (Cable keeper)
3D
Published 2019-02-13T15:17:02+00:00
This is a quick and reliable print requiring no support. A unique way to keep cables or wires where you want them. Sized for standard Apple charging cables. can be sized up or down to suit your needs. simply heating the lower jaw and opening the mouth a bit can help fit thicker cables. attached to surfaces with 3m double side tape for sturdy hold and quick clean removal if need be. I've printed these in Pla, semiflex, colorfabb woodfill and ngen. all printed perfectly each time. .25 layer height was used for these colorfabb bamboofill prints in the picture. 3hr print time for the set of 8. Please post pictures of your prints. Cheers
no support. print any layer height, min 10% infill and whatever suits your printer best for adhesion to the print surface. File is meant to be very simple to print. I like a brim when printing multiple DinoBytes at a time they break away very clean.
| Date published | 13/02/2019 |
| Benoetigte Zeit | 37 - Minuten |
| Menge an Filament | 5g |
| Dimensionen | 27.17mmx25.4mmx26.74mm |
| Technologie | FDM |
| Support Free | YES |
