DJI "PHANTOM 3 CAMERA VIBRATION ABSORBING BOARD"
4,764
views
298
downloads
2 comments
Loading comments...
DJI "PHANTOM 3 CAMERA VIBRATION ABSORBING BOARD"
3D
Published 2018-01-19T10:05:54+00:00
11
2
Add to Collection
Description
This the replacememt part for the DJI PHANTOM 3 Gimbal mounting plate. I built it for a friend who's drone crashed. it is modeled based on measurements from the broken part and the actual drone. I have done both a solid and a 15% Hex infill on this part and i have listed estimated weights based on the the model volume in the images. i have not weighed the physical sample as i do not have a scale that measures such a small amount. if any one who prints these parts is able to verify my estimates please comment, it will be greatly apprecitated.
Printing Details
No brim required
Technical Information
Date published | 19/01/2018 |
Benoetigte Zeit | 59 - 63 Minuten |
Menge an Filament | 3.44 Meters, 8.703 cm³, .53 in³ |
Dimensionen | 3.43" x 3.43" x 0.135" (87.12mm x 87.12mm x 3.43mm |
Technologie | FDM |
Schwierigkeitsgrad | Easy |
More Information
Object Parts
Printed without support and have some issues on the bottom, but we will see how it fits.