Dr. Facilier - Shadowman from Princess & the Frog
Dr. Facilier - Shadowman from Princess & the Frog
3D
Published 2019-10-18T15:16:03+00:00
In the spirit of Halloween I wanted to do a fun design from one of my favorite Disney movies : The Princess & The Frog. This character was the Shadowman (or Dr. Facilier), a voodoo practitioner in New Orleans. The colors are what I liked about this, so if you have a color printer please let me know how it turns out!
For my testing I used Matterhackers Silver PETG filament (250C on the FLSunQQs), and for my settings I have attached my Cura screenshots. I made it with a flat base so it was easier to print, but a few supports will be needed. I used the experimental tree supports in Cura because they tend to be easier to break off, but you have to be carefull around the fingers.
I printed at 90% of the original file size to decrease the printing time to 11hrs 11min, but you can always decrease the layer height for more detail (it just takes much longer). I printed at .25mm layer height.
| Date published | 18/10/2019 |
| Menge an Filament | 126g |
| Dimensionen | 129.2x135.6x103.7 |