Drinkcoaster: Starbucks 'Harry Potter'
Drinkcoaster: Starbucks 'Harry Potter'
Published 2021-01-21T12:28:01+00:00
Hello, This is a drinkcoaster with a Starbuck Harry Potter logo.
I have printed this model in multi-color, with a single extruder. It is also possible to print this model with one color!
This is a standard size coaster (100 by 100 by 5 mm), to fit in my coasterholder:
https://www.thingiverse.com/thing:3130397
Made with love by:
Raimon of IdeaLab
I have printed this model in Fillamentum electric grey & mint PLA. I have used 0.25mm layer height and 18% infill. I have used a heated bed at 55 degrees Celsius and my nozzle size is 0.4mm and was heated at 210 degrees Celsius. I have used a brim to ensure adhesion to the build plate. I have used the movement setting: 'combing not in skin' (Cura) for a smoother topsurface. I paused the print at the point where the Harry Potter logo begins, changed filament, and resumed the print. Don't worry to use your own settings while this isn't a difficult model.
| Date published | 21/01/2021 |
| Benoetigte Zeit | 113 - 114 Minuten |
| Menge an Filament | ~ 23 gram |
| Dimensionen | 100*100*5mm |
| Support Free | YES |