Ear pick
Ear pick
3D
Published 2020-06-01T15:57:46+00:00
An ear pick for clearing ear wax or just scratch the itch inside the ear. Simple design. Easy to print.
I wonder why not many of this household items are on the platform.
A bit of post-processing is recommended. Check the print detail.
Print with any material
Sanding the rim off a bit is highly recommended. I put fillet (curved edge) on all edges but if your printer squishes the filament to the bed, as it should, the lower fillet may turn out flat. The other fillet may turn out pretty sharp too, given the size of the nozzle. So, just slide a file 3 times across the edges. That should remove all sharp edges. If you don't have a file or sandpaper, you can use it right off the print bed. Sanding simply gives softer touch to it.
| Date published | 01/06/2020 |
| Benoetigte Zeit | 5 - 10 Minuten |
| Menge an Filament | 1 gram |
| Dimensionen | 86.4x7x4.1 |
| Support Free | YES |