Easy game
Easy game
3D
Published 2015-10-14T18:39:44+00:00
Easy game for 2-7 peoples. All you need is dice, print the board and 2-7 figures and play!
Is easy to play, you will see!!!
This fame you can play anywhere where the base is moving. The figure has a groove, so it not possible that figures falls from board!
This print is made on MakerBot Replicator Fifth Generation. The dimension of the board: 200,9mm x 174,07mm x 7mm, Infill 10%, no support and layer high 0,1 and the figure 12mm x 12mm x 24,8mm, Infill 100%, support and layer high 0,1. Is better print if you turn board upside down, because you will need a lot of time to clean the grove- lead, or should be printed on a DLP or SLA machine! When you are done, paint the figure or change the filament colure. Take the dice and play!
| Date published | 14/10/2015 |
| Benoetigte Zeit | 1020 - 1200 Minuten |
| Menge an Filament | 123 |
| Dimensionen | 200,9 x 174,07 x 7 |
| Technologie | FDM |
| Schwierigkeitsgrad | Medium |
| Support Free | YES |