Ellipso Glasses #DESIGNITWRIGHT
Ellipso Glasses #DESIGNITWRIGHT
3D
Published 2017-01-24T11:55:08+00:00
This is my completely printable project for #Design It Wright !
First of all, I would like to thank the various partners: MyMiniFactory, Floreon 3D, Ultimaker, iMakr, Bespoke Eyewear and finally Ian Wright, for whom we had to create a pair of glasses in his image.
I was very pleased to take up the challenge that was proposed. I took the greatest care at each step to get the best possible product: reflection on the contribution of 3D printing and its technical constraints, sketches, modeling, printing of the 3 objects, taking photo. So, I hope that the result will please you, organizers of this magnificent event. The reality should join the virtual when Ian Wright will try my "Ellipso Glasses" model, as the synthesis imagery published on the web page of this project. I would be very happy if my design pleases Ian.
Tips and parameters for a good print result :
All the parts are optimized for those settings :
(I think these are the most widespread features currently on large public machines and RepRap machines manufactured at home.
I hope to soon be able to test more accurate prints with a beautiful printer and beautiful filaments ;-)
Nozzle diameter : 0.35 mm or 0.4 mm
Layer Height : 0.2 mm or 0.1 mm
Wall Thickness : 0.7 mm or 0.8 mm
Infill : 20 pc
Top and Bottom Thickness : 0.6 mm
Brim : YES / Width 10 mm
Support : YES / Touching bed / Lines / Overhang Angle : 45° / Fill Amount : 15 / Distance XY : 0.8 mm / Distance Z : 0/0 mm
Print with different colors and try differents combinations. Enjoy !!!
Tips and parameters for a good print result : All the parts are optimized for those settings : (I think these are the most widespread features currently on large public machines and RepRap machines manufactured at home. I hope to soon be able to test more accurate prints with a beautiful printer and beautiful filaments ;-) Nozzle diameter : 0.35 mm or 0.4 mm Layer Height : 0.2 mm or 0.1 mm Wall Thickness : 0.7 mm or 0.8 mm Infill : 20 pc Top and Bottom Thickness : 0.6 mm Brim : YES / Width 10 mm Support : YES / Touching bed / Lines / Overhang Angle : 45° / Fill Amount : 15 / Distance XY : 0.8 mm / Distance Z : 0/0 mm Print with different colors and try differents combinations.
| Date published | 24/01/2017 |
| Benoetigte Zeit | 100 - 150 Minuten |
| Menge an Filament | 50 |
| Dimensionen | 130x55x140 |
| Technologie | FDM |
| Schwierigkeitsgrad | Medium |