An elegant lamp for a bedside or a reading nook. This lamp is simple, in that it's shade body is a two piece design with no supports needed for the printing process. The top shade simply slots in on top of the bottom shade, making bulb changes a quite simple process.
Just enough light emits from the 10mm slits, creating a softer, more eye comfortable glow.
Note: Use PLA ONLY if you're using LED Bulbs. PETG can be used for others. I recommend using Edison style or tube style bulbs. Regular sizes do fit though (As seen in the photos)
Lamp Socket and Cord: https://www.amazon.com/Cable-Matters-2-Pack-Hanging-Lantern/dp/B07BLJH57Z/ref=sr_1_56?keywords=black+cord+light+pendant+plug&qid=1563640755&s=gateway&sr=8-56
Edison Bulbs: https://www.amazon.com/CMYK-Dimmable-Squirrel-Filament-Decorate/dp/B07QWWG91S/ref=sr_1_3?keywords=edison%2Bled%2Bbulbs&qid=1563641153&s=gateway&sr=8-3&th=1
Tubular Bulbs: https://www.amazon.com/Dimmable-Daylight-Kohree-Filament-Equivalent/dp/B075QBCZG8/ref=sr_1_7?fst=as%3Aoff&qid=1553883115&refinements=p_n_feature_seventeen_browse-bin%3A9692443011%2Cp_n_feature_four_browse-bin%3A6105695011&rnid=3594355011&s=hi&sr=1-7
Insert the cable through the top and out the bottom of the shade base. Once the bulb socket reaches the shade base, firmly press it down, leaving 8mm-10mm exposed at the top.
Place whichever light bulb you wish into the lamp socket.
Place the top shade on the shade base. Slightly compress it to allow the shade top to slot in. Align the light emission slots for the top and bottom shade.
Make sure the cord rests in its slot once the lamp is placed in a desirable location.
If you wish to add weights so the lamp is less prone to being moved, I found these work best: https://www.amazon.com/WEIGHTS-STICK-ADHESIVE-WEIGHT-PIECES/dp/B0714DGW9Y