Filament Storage for china cabinet
Filament Storage for china cabinet
Published 2018-07-16T09:12:33+00:00
this was originally uploaded to thingiverse, updates will appear there before they appear here
these files are licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives 3.0 license
i am mirroring it here but only including the v3, as the flat racks, last MUCH monger over the ones with a point.
this is to use a existing china cabinet i have with glass doors to store my filament. my apartment is already quite dry so it wont be airtight, but will have enough decassant in it to compensate.
things to make in addition to this are desicant boxes and to fill with indicatior desicant.
i used the scad in this thingiverse thing to make 40x40x150 mm boxes. then fill with this desicant https://amzn.to/2mlkuVm (note this is a amazon affiliate link, i will recieve a small portion of the sale when you use the link)
not much to say
use your own settings, a higher then normal infill, (30-50% becasue this is load bearing)
print time will vary based on how many parts you need, for me each 150 mm length took about an hour, i cant remember.
dimensions will vary based on whatg you need. its liek a train track, its as long as you need.
if you are able to bridge 15mm then no supports are need, otherwise use them for the tracks.
Date published | 16/07/2018 |
Support Free | YES |