FULLY Printable 2 STROKE ENGINE Model - Realistic & Working
FULLY Printable 2 STROKE ENGINE Model - Realistic & Working
3D
Published 2020-11-09T10:46:24+00:00
Hi everyone,
First of all i have a video about this project on my youtube channel. I think you should assemble it by watching the video.
Here is the link: https://www.youtube.com/watch?v=klcB5OxXbkE
I designed a 2 stroke engine model in this project. It can be completely printed with a 3d printer. You don't need any extra parts.
Piston diameter 25 mm and stroke 25 mm. Thus, it has a cylinder volume of 12.25 cc.
The bearings I use are 608zz type and have 8 mm inner diameter. (From those used in standard stress wheels).
I used PLA+ at all parts. Layer height 0.16 mm and infill 100% for moveable parts (crank, shafts, piston, pins, connection rod). I printed the remaining pieces at 25%.
I used Simplify3D for sliceler, more details on video.
IMPORTANT
Some parts have 2 versions. One is in full section and the other is in half section. I have added two versions, you can print the way you want.
Also, in some printers, the circle shape may not be exactly as desired. For this I have also added the tolerant shape of the pins. If your printer can print a 3mm diameter circle exactly 3mm, use 3mm diameter pins. Otherwise, use 2.5 mm pins.
Besides, I used glue to join the pieces together.
If you have any problems please leave a comment.
| Date published | 09/11/2020 |