Tuscan Style Colonnade
$6.00 Tuscan Style Colonnade
3D
Published 2020-04-06T03:25:15+00:00
The existing FDM version product was completely modified and converted into a resin version of the colonnade.
However, existing products can also be downloaded.
Please keep this in mind when purchasing a product.
-----------------------------------------------------------------
This product includes the following items.
- Tuscan Colonnade (square roof).stl
- Tuscan Colonnade (triangular roof).stl
We recommend printing with a resin printer.
this product can be scaled freely.
The height of this product is 34mm.
When printing, please adjust to the desired scale.
You can freely increase the scale of this product by using a slicer program. (e.g. 150%, 200%, 300%)
The pre-supported version we provide may have different results for each printer,
so we recommend only using it as a reference during support work.
Please look forward to the future products of BLUE SAND! Thank you : )
[Note]
Test printers: Anycubic Photon Mono X and D2
Test resin : Anycubic standard gray
[Update Note]
- 09/21/2023
A resin version of the colonnade has been added to replace the existing product.
FDM versions of existing products are also available for download.
- 10/19/2021
We have added a discount code for buyers of this product.
This discount code can be used to purchase 'Doric Order Monument'.
To check the discount code, please refer to 'post-purchase information' on the product purchase page.
- 02/25/2021
It has been renewed to a new version.
- 04/19/2020
Add 'New Base' STL file. Version for saving time and filament.
Note : Product assembly video
[2021 FDM Version]
1. This product is composed of Base, Tuscan Column 9D, Architrave, Frieze, Cornice, Roof, and Fence,
and each consists of left finishing part L, right finishing part R, and basic parts Basic.
2. Print 1 each for L and R and 5 for Basic. In addition, you can print 14 basics without printing L or R to make it into a circle.
3. This product is designed to fit into our product Greek column 9 diameter ratio.
4. As a result of our experiment, we succeeded in reducing the size of the product to 60% and printing it,
but we do not guarantee the quality of the product.
-------------------------------------------------
[2020 FDM version]
1. Minimal support
2. It requires assembly with a glue and a BBs
- All parts need to be printed only once.
However, column need to be printed 8 times.
3. FDM 3d printer recommended
4. PLA filament recommended
5. Required build volume : at least 180mm x 180mm x 150mm
6. Demensions : 320mm x 320mm x 220mm
| Date published | 06/04/2020 |
| Price | $6.00 |
| Menge an Filament | 1602.2g |
| Dimensionen | 32 x 32 x 22 |