Gunner Turret Risk of Rain 2 Fan Art
Gunner Turret Risk of Rain 2 Fan Art
3D
Published 2020-05-26T15:49:34+00:00
A helpful little turret that shoots at bad aliens for you once you repair him. Featured in the Risk of Rain game franchise. Truly one of my all time favorite games.
Modeled for 28mm, it's perfect for size huge creatures with any 3-inch base.
Not too crazily detailed, made for easy desktop FDM printing.
Very paint-able, just spraypaint it black and go to town with model paints. Always remember, thin your paints!
Printer: Creality Ender 3
Material: PLA
Rafts: No
Supports: Yes, lots
Layer Height: 0.12mm
Infill: 35% Gyroid
Slicer: Cura 4.4
Nozzle: 0.4mm
Speed: 25mm/s
Line Count: 3
Top Layers: 7
Bottom Layers: 5
Ext. Temp: 195°C
Bed Temp: 60°C
Retraction Distance: 7.5mm
Retraction Speed: 50mm/s
Software Used: Blender 2.8
Having Some Issues?
A well-calibrated printer is key to really nice print quality. Try the following by looking up some tutorials:
Calibrate E-Steps
Calibrate X, Y, Z Motor Steps
Calibrate Flow Rate (aka "Extrusion Multiplier")
Re-level Build Plate
Dial in filament temperature
Toast filament with a dehydrator
Slow down print speed
| Date published | 26/05/2020 |
| Benoetigte Zeit | 60 - 121 Minuten |
| Menge an Filament | 6 grams |
| Dimensionen | 27.7mm x 33.8mm x 23.5mm |
