Hexagonal Ship Stands - Multi Arm Addon
Hexagonal Ship Stands - Multi Arm Addon
3D
Published 2021-01-11T12:01:58+00:00
This is an addon for the Hexagonal Ship Stands package.
It allows to put more spaceships on one stand, for example to hold multiple fighter models. Just print a stand, glue 6mm diameter or smaller magnets on top of the end of each arm and (optional but recommended) one magnet inside the hole at the bottom.
They should not require supports, as the only free-hanging part is the whole inside and that is so small than it can be easily bridged.
I printed and tested the model and tried to make sure that everything works as smooth as possible. If however you have issues or feedback, please do not hesitate to leave me a comment.
Feel free to remix this design as you like!
Update 11.1.2021:
- Added 4mm Magnet versions of the multi-arms, suitable for 2-3mm height magnets.
Update 15.1.2021:
- Complete overhaul. Now comes with optional top-slots for 4mm diameter, 3mm height diameter magnets that can even be stacked on top without using magnets.
Update 25.1.2021:
- Some minor adjustments on the hole and peg diameters.
In case the download seems to be empty, myminifactory did not update the content yet, try to download it directly from: http://www.illusion-games.de/download/FullThrustHexStands/HexagonalShipStands-MultiArmAddon.zip
I test-printed without supports, with 0.2mm layer height and a 0.4 nozzle. Everything smaller should work fine.
| Date published | 11/01/2021 |
| Support Free | YES |