Hollow Emporer Palpatine's Cane
Hollow Emporer Palpatine's Cane
Published 2018-10-17T14:12:11+00:00
I have taken the Original Emporer Palpatine's Cane from https://www.thingiverse.com/thing:2638435 and made it hollow and inserted 1/4 steel rod with a fiberglass resign, so it can be used as a real cane as well as a Prop for Cosplay.
I would recommend drilling out the puzzle pieces then insert the 1/4 inch steel or aluminum rod then pour Resign to make it stiffer and usable as a real cane.
The Remix i did, i was able to support really leaning on it with out it bending a whole lot.
For those users who do not have a large printer I've cut it down to 12 1/2 pieces, that way it would be a lot easier to print each half piece glue one have of the cane together pour the resign and insert the rod then glue both halves together.
75% infil at .2 layer Hollowed out to allow steel or alumimum rod to be inserted.
Each piece is drilled out in the center then glues with the outer walls only, Later filled with 8 oz resign then steel rod inserted and then final fill with fiberglass resign
Date published | 17/10/2018 |