HP flat panel monitor bezel clip (2709m) (Pack of 6)
HP flat panel monitor bezel clip (2709m) (Pack of 6)
3D
Published 2014-11-09T07:34:22+00:00
This thin clip mates perfectly to the geometry of the top edge of HP2709 monitors, providing a curved support/hook. spacing 6 of these across the top of the monitor let's you store pens, highlighters, rulers etc within easy reach. The bezel/border around the display is normally wasted space - this turns it into something useful. I've only tested it with my own monitor (model HP2709m), but if the top edge geometry of your monitor looks like the one in my pictures, there's a good chance these will work with yours, too. I wanted mine in black, but in the pictures you can see that I printed some in blue so they could be more clearly seen "in action".
Print at 0.15 mm layer height, with 100 % infill. This uses 1 g of filament and takes 4 minutes.
| Date published | 09/11/2014 |
| Benoetigte Zeit | 33 - 34 Minuten |
| Menge an Filament | 1 g |
| Dimensionen | 52 x 31 x 2 mm |
| Schwierigkeitsgrad | Very Easy |
