Inferno Upgrade for FLSUN i3 Plus/Clone Style Printers - 2nd Generation
Inferno Upgrade for FLSUN i3 Plus/Clone Style Printers - 2nd Generation
3D
Published 2019-01-07T12:11:30+00:00
I was inspired to design my own 3D printer and this is the 2nd generation of this printer. The design goal is to be able to rapidly produce large mechanical parts for rapid prototyping and allow for soluable supports to allow for more complex designs.
The main features that have been realized in this itteration is the use of steel rods for the X-axis rather than aluminium extrusion. Addition of two part cooling fans. Use of two volcano hotends instead of the standard v6. Redesign of the Z-axis mounts.
Changes in progress:
1. Redesign of the extruder carriage to to be more compact and lighter
2. Modify the Y-axis mouns to a single larger part
3. Improve the rigidity of the upper portion of the frame
4. Improve cable management
5. Develop instructions and a Bill of Materials
6. Edit the firmware and release it
7. Add the option to use the color mixing diamond hotend
Products used:
https://filaments.ca/?rfsn=4740568.a03b49
Note: Affiliate link above - I earn a commission from qualifying purchases at no additional charge to you just by using the links listed which helps support the channel.
To find more of my work, please check out my website: http://wrightbuilt.ca/
To download any of my own 3D designs, check out my design library: https://www.myminifactory.com/users/WrightBuilt.ca
Support me by Subscribing/Liking my YouTube channel, or by tipping me via MyMiniFactory (PayPal) here: https://www.myminifactory.com/users/WrightBuilt.ca
You can find my disclaimer here: http://wrightbuilt.ca/disclaimer-page/
All parts printed without support. White parts are PLA and the green parts are either PLA or PETG. Would use PETG for everything to improve strength and heat resistance. All filament used is from Filaments.ca lines, Standard PLA, Standard PETG, and Econofil PLA.
| Date published | 07/01/2019 |
| Support Free | YES |