Inverted Buddha Marcus Aurelius
Inverted Buddha Marcus Aurelius
3D
Published 2015-09-01T18:21:48+00:00
Recently an old pal of mine offhandedly mentioned on Twitter that boy howdy would he like a Standing Buddha Marcus Aurelius for his living room.
You'd be scraping support plastic off the underside of this model for days if you printed the original, but thanks to a little trick I picked up at the Make: Magazine 2015 Digital Fabrication Shootout the need for support is much, much reduced.
All's you gots to do is rotate the model roughly 225° so its feet are pointing skyward and manually put in a few supports in your software of choice. This technique should work for many humanoid models.
I also added a circular base. A little super glue or epoxy should hold things together. Thanks to Al Billings for the original model.
Print at 0.2 mm layer height, with 10% infill.
| Date published | 01/09/2015 |
| Benoetigte Zeit | 29 - 39 Minuten |
| Menge an Filament | 1 g |
| Dimensionen | multiple parts |
| Schwierigkeitsgrad | Easy |