Joystick Toy
Joystick Toy
Published 2021-05-10T10:23:41+00:00
I designed Joystick Toy in Fusion360 and prototyped it through several stages before landing on this design.
I only recommend printing this assembly in PLA or a material that maintains dimensional accuracy after printing. It prints well at 100% but I would recommend printing it at 125%. I prefer using .15mm layer heights which seems to work well for threads and the ball-and-socket joints.
I natively design in Imperial measurements so you might have to change your scale to 2540% to get it to convert into Metric but the latest version of PrusaSlicer should notice that it is designed in Imperial.
Print in PLA or material that maintains dimensional accuracy.
I recommend printing at 125% scale from the original size.
.15mm layer height works well and you may want to decrease print speed on the underside of the Knob component if your printer struggles with overhangs.
Date published | 10/05/2021 |
Benoetigte Zeit | 3 - Minuten |
Menge an Filament | 16 Grams |
Support Free | YES |