Lockpick Puzzle 10
Lockpick Puzzle 10
3D
Published 2018-09-19T01:30:27+00:00
Twist and turn the handle on this lock to solve the maze hidden inside. My Lockpick puzzles are the result of my goal of creating a print-in-place puzzle that comes off the print bed ready to solve!
This is puzzle number 10 of 10. I tried to make it so the puzzles become increasingly difficult through the series, although they're all still on the easier side. If there's enough demand I can continue and make things more difficult :)
For ideal results, print at 0.15mm layer height. Other layer heights may make it difficult to snap the handle and lock apart. 2-3 shells and 5-10% infill should be fine. No supports. You can increase shell count if you're worried about the inner rod breaking, but I had no problems.
Model pictured in Fillamentum Vertigo Galaxy PLA and Extrafill PLA
*Edit 01/09/19* Added separated parts in case your printer can't manage the assembled version. The key will require supports!
| Date published | 19/09/2018 |
| Support Free | YES |
Printed with .15mm layer heights in MatterHackers Pro Series Translucent Red PETG. It's such a cool design and the infill created a very nice pattern on the exterior. A note for folks printing in PETG: it may be useful to print this as two separate parts - I did have some separation issues (which I expected, it's PETG after all) getting the lock to twist free initially.