Magnetic Poster Hanger
Magnetic Poster Hanger
3D
Published 2019-11-17T18:10:12+00:00
Wall mounted magnetic poster holder.
Hang your posters without damaging your walls or your posters, allows for easily movable, changable, and rearangable poster hanging!
Fits a 16.4 inch wide Red Bubble Small poster. It can be used on smaller sizes or rotated to mount larger posters horizontally. May be used on slightly larger posters as well.
Attaches to the wall with nails, small screws, poster putty, or command strip device.
Purchase
I purchased a set of 150 6x3mm magnets for this project:
I would suggest attatching the mounts to the wall with Poster Putty:
(These are affiliate links)
Post Processing
The mount prints in 2 parts, with a 0.2mm tolerance. The parts must mount together in such a way that the mount is flush with itself . Magnets may be inserted with the help of a hammer, but may need some glue to ensure longevity.
Mounting Instructions:
One mount (either with nail holes or mounted with putty) will be attatched to the wall. The poster will be sandwiched between this mount and either raw magnets(Photo 2) or a mount without nail holes(Photo 1).
Posters can be mounted either horizontally or vertically(3).
If mounted vertically, a lower mount does not NEED to be attatched to the wall, as it may simply serve as a weight to prevent the poster from curling.
Hope yall enjoy, let me know if you have any questions.
| Date published | 17/11/2019 |
| Benoetigte Zeit | 200 - 90 Minuten |
| Support Free | YES |