Makerfarm MB-Plus hotend mount.
Makerfarm MB-Plus hotend mount.
3D
Published 2016-07-04T09:11:41+00:00
I purchased an MB Plus hotend (http://www.ebay.com/itm/MB-Plus-Metal-Hot-End-for-RepRap-3D-Printer-1-75mm-Filament-0-4mm-Nozzle-Prusa-/321602397864) as I tragically broke my E3DV6 and wanted to try something new. Since I could not get it mounted to my X carriage and couldn't find any designs to get this mounted on my printer, I had to come up with my own design.
The hotend requires a 5mm mounting plate, the one I have came with the printer but if you purchased yours with an E3D hotend then it would have came with a 6mm plate. You could either buy the plate or print one, I'm sure there are some designs out there.
Print with current rotation with support enabled. I printed it at 0.2mm, 100% infill. 0.25 layer height should be sufficient.
Print Settings: Printer: flashforge dreamer Filament: HIPS Layer Height: 0.2mm Infill: 10% Supports: Yes Raft: Yes
| Date published | 04/07/2016 |
| Benoetigte Zeit | 49 - 58 Minuten |
| Menge an Filament | 29.32 |
| Dimensionen | 74mm x 54.16mm x 31.70mm |
| Technologie | FDM |
