A 3D printed replica of the shape that Star Butterfly's wand takes when is held by Marco during the third season of Star vs the forces of Evil.

Instructions:
Download the STL files and print them with the following settings

• Blade.stl: 0.15mm layer height, 15% infill, No supports
• Jewel.stl: 0.10mm layer hieght, 10% infill, No supports
• FaceA.stl: 0.30mm layer height, 25% infill, Supports enabled
• FaceB.stl: 0.30mm layer height, 25% infill, Supports enabled
• Cover.stl: 0.30mm layer height, 25% infill, Supports enabled
• Wing.stl (2 times): 0.30mm layer height, 20% infill, No supports
• OrbA.stl: 0.30mm layer height, 25% infill, Supports enabled
• OrbB.stl: 0.30mm layer height, 25% infill, Supports enabled
• OrbPin.stl (2 times): 0.20mm layer height, 50% infill, No supports
• UprCap.stl: 0.30mm layer height, 30% infill, No supports
• Rod.stl (2 times): 0.30mm layer height, 50% infill, No supports
• RodPin.stl (2 times): 0.20mm layer height, 50% infill, No supports
• LwrCap.stl: 0.30mm layer height, 30% infill, Supports enabled
• TipA.stl: 0.10mm layer height, 25% infill, No supports
• TipB.stl: 0.10mm layer height, 25% infill, No supports

After all the pieces have been printed, assemble them following the diagram. I suggest to use superglue (cyanoacrylate) to hold them together. The parts can be painted easily using acrylic paint.

I made an Imgur album showing the assembly process!