Mega 2560 Pro Mini Tray
Mega 2560 Pro Mini Tray
Published 2018-11-24T16:42:13+00:00
Little tray to hold an Arduino Mega 2560 Pro Mini and two bread boards.
I printed that in black PLA at a layer height of 0.3mm, 1.2mm wall thickness and 20% infill with support underneath, as the bottom is hollowed out to save material.
Before screwing the Arduino to the stand offs take the screw, heat it and carefully screw it into the two stand offs. Wait until its cooled down and carefully unscrew it - that way, you will get proper threads in the plastic and don't risc any cracks when mounting the Arduino! I used 10x2,5mm self tapping screws.
Unfortunately there are several versions of this module available that slightly differ in dimensions especially regarding the placement of the screw holes.
Therefore, I made the construction public on Fusion360 as https://a360.co/2FFj7O5 for suitable modification.
Date published | 24/11/2018 |
Benoetigte Zeit | 220 - 250 Minuten |
Dimensionen | 170mm x 90mm x 15mm |