Modular vacuum table/clamp for small cnc machines
Modular vacuum table/clamp for small cnc machines
3D
Published 2017-08-24T13:24:12+00:00
Vacuum clamp/table for smaller cnc machines/routers. It contains modules 50x50mm which, once printed, you can connect as you wish, glueing it together. You can make table as big as you want by printing a lot of these modules. It contains side, middle, angle and connector modules which, when combined, make one whole table. Modules are 10mm high.
It also contains connector in which you can screw in PTFE tube connector for making vacuum. In future I will make vacuum cleaner adaptor.
Print, glue together, you can also apply various chemicals for making it shine and airtight. In grooves you can add rubbers for making better vacuum contact. You will probably need to sand sides for better sealing.
Print flat, without support, but make sure you put 100% infill, so therefore it will not make problems when you make vacuum. You can also use some kind of polisher or glue for plastic, which once it hardened it will make airtight seals.
If you have any idea how to improve this design, feel free to post it, and if you make this, feel free to post pictures.
Printed well in PLA at .2mm layer height with 15% infill and no supports.
| Date published | 24/08/2017 |
| Benoetigte Zeit | 184 - 184 Minuten |
| Menge an Filament | 67g |
| Dimensionen | 110mm x 140mm x 13mm (all pieces combined on one plate) |
| Technologie | FDM |
| Schwierigkeitsgrad | Easy |
| Support Free | YES |