Modular Wet Palette with brush storage and dry palette
Modular Wet Palette with brush storage and dry palette
3D
Published 2020-01-20T16:10:12+00:00
Modular 3D Printed Wet Palette with brush storage and dry palette.
Demo video: https://youtu.be/iYq_sJFmXDk
Outer Dimensions: 230mm x 200mm
Magnets: 92pcs. 5mm Diameter 2mm Thickness
Sponge/Paper: 200mm x 140mm
Modelled this Wet palette while wainting for my paints to arrive.
The bottom part is used as a wet palette by inserting a sponge cloth, and a piece of baking paper (non-wax).
The top have a hole to fit a modular dry palette. Currently two options are avialable. One requiring a piece of Baking paper as a bottom, and the other, using 3D pritned "wells" to hold the paint.
The palette also inclues a compartment for brush storage, or any other small accessories.
Top and bottom was printed in Prusa Orange PETG.
Dry palette printed in Ploymaker Polysmooth, and smoothened using isopropanol, to minimize layer lines.
Print is paused at layer 47 (9.4mm) to insert magnets.
If you have a Prusa machine, used the Layer color change feature :)
A total of 92 magnets was used.
| Date published | 20/01/2020 |
| Dimensionen | 200mm x 230mm x 29mm |
| Support Free | YES |