Monster Hunter - Elite Blade
Monster Hunter - Elite Blade
3D
Published 2017-02-13T10:14:07+00:00
Dear Community,
I present to you the Elite Blade from Monster Hunter Series, as it would be my entry design for the competition made possible by Capcom and MyMiniFactory teams.
The design is detailed after the Elite Blade, which works in dual mode, a Charge Blade in addition to a Shield & Sword Combo.
Currently the size ratio of the blade is 1:14, hopefully one day I will be able to print it at its real size.
Print Information:
The Blade is about 28.7 cm in height, and weighs around 116.8 grams.
Total Print Time 21 hours.
There are no supports required to be able to print this model of the elite sword as long as you print at the oroginal orientation.
All the parts are set in their original orientation I used for printing.
Feel free to scale the size of the parts, but make sure to do it across all the parts identically.
Disclaimer,
I acknowledge the terms of the competition and herby present the Elite Blade as my 2nd entry design, and may the best hunter wins!
Abodizer89,
| Date published | 13/02/2017 |
| Benoetigte Zeit | - 1263 Minuten |
| Menge an Filament | 116.8 grams |
| Dimensionen | 287.684 mm x 129.364 mm x 33.50 mm |
| Support Free | YES |