Monster Hunter Generations - Astalos Thunder Blade
Monster Hunter Generations - Astalos Thunder Blade
3D
Published 2017-02-21T10:40:27+00:00
I think I'm still in so here I go! We are 3D Cosprops and that's our 3D model for the Capcom challenge!
I have seen a lot of projects this month and I wanted to do something different. I designed this blade taking Astalos as reference.
This model is 55cm long but it was scaled to 25% to be able to print it in time. Also it was designed to have leds inside, take a look at the photos.
If you have any questions you can contact us in this page: https://www.facebook.com/3DCosPropsandMore/
E-mail: carlessa1992@gmail.com
Details:
Layer height: 0.15 mm
Fill density: 25%
Print speed :50 mm/s
Material: ABS
Approximate printing time: 43 - 46 h
This model needs support material because of the leds cavity.
I have added the blade in one piece and divided in three to help people to print it.
| Date published | 21/02/2017 |
| Benoetigte Zeit | - 2760 Minuten |
| Technologie | FDM |