Montini building bricks Pip Strip Set (Lego Compatible)
Montini building bricks Pip Strip Set (Lego Compatible)
3D
Published 2020-01-09T22:30:12+00:00
Montini building bricks were produced from 1961 to 1969 in the Netherlands. They were originally made from soft, pliable polypropylene.
http://www.puppenhausmuseum.de/montini-bausteine.html
Please do not mix these with original Montini parts. PLA is much harder than the original bricks, and the layer ridges act like sand paper. You will wear out the original Montini bricks very quickly.
The top pips will fit Lego full height classic bricks. The bottom holes fit but do not grip Lego pips.
The right angle strips with the pips on the inside are modeled after the original Montinis. I added the other set with the pips on the outside so they can be used as perimeter decoration for buildings.
These are optimized for a 0.4mm nozzle. They are friction fit parts, so tolerances are important.
| Date published | 09/01/2020 |
| Support Free | YES |