Nintendo Switch controller wall mount
Nintendo Switch controller wall mount
3D
Published 2017-03-14T10:09:50+00:00
I wanted a mount to get my extra controllers off the ground and to keep them from getting lost in the couch.
I created this mount to hold one set of joycons, aswell as the wrist straps. I do so in two ways, either directly connecting the joycon to the mount via two evenly spaced female connectors, or by hanging them by the two identical hooks at the bottom of the mount. I also added a untility pocket to hold any other small accessory.
there are currently 4 different stl files to choose from. each have a different player number on them so choose accordingly.
I printed this at a .1mm layer height using 20% infill.
I also went over the 20mm command strip channel that goes up the back of the mount with a soldering gun to ensure a nice smooth surface to help adheasion. you could probably get away with a little sanding or anything to smooth the surface for a nice strong hold.
the command strips i used can be ordered off of amazon at the following link.
| Date published | 14/03/2017 |
| Benoetigte Zeit | - 400 Minuten |
| Menge an Filament | 64 grams |
| Dimensionen | 69.0mm x 36.2mm x 101.0mm |
| Technologie | FDM |
| Support Free | YES |