nintendo switch joycon accessory organizer
4,571
views
219
downloads
1
collection
4 comments
Loading comments... 
nintendo switch joycon accessory organizer
3D
Published 2017-05-18T11:22:58+00:00
42
4
Add to Collection
Description
Update: the orignal model wasn't loading in cura properly anymore, so I have remastered the file to just be better.
This organizer slides on the back of the dock and can hold the joycon grip and 2 straps or just 4 straps.
I did this print at 0.2mm layer height it took 1 hour and 12 minutes.
Printing Details
print it with the big flat side down, no need for supports unless you
Technical Information
| Date published | 18/05/2017 |
| Benoetigte Zeit | 72 - 118 Minuten |
| Menge an Filament | 13 grams |
| Dimensionen | 51.3x44.1x32.0mm |
| Technologie | FDM |
| Schwierigkeitsgrad | Medium |
| Support Free | YES |
More Information
Object Parts
Had to adjust the size and rotation of the model in MakerBot Print. The Z-axis scale should be set to 51.3mm, with Uniform Scaling on, and the model should be rotated by -90 degrees on the Y-axis. Printed at 100% infill and 0.1mm layer height