OnHub Shell: OnPort Supreme
OnHub Shell: OnPort Supreme
3D
Published 2016-07-14T16:10:46+00:00
Print orientation should be upside down. Flat top surface should be the first layer.
Support needed for the vents!
Intended color should match your room's color pallete. It might be a good idea to finish the print up with some sanding and filler primer.
Note: this is to big for my printer, couldn't test print
Note: probably won't count for the OnHub Contest, but one can try. It's still 7/5 where I'm at.
Note: This was made for a friend that wanted to match their OnHub to their Apple Express and TimeCapsule. And yes OnPort Supreme is a play on airport extreme.
please take note that this is a piece model before print you have to separate it. the round model took about 58min to print the square model took about 1hrs 38min to print Print Settings: Printer: flashforge dreamer Filament: PLA white Layer Height: 0.1 mm temperature extruder: 220 temperature bed: 40 Shell: 4 Infill: 10% Supports: no Raft: no software: simplify3d
| Date published | 14/07/2016 |
| Benoetigte Zeit | 200 - 220 Minuten |
| Menge an Filament | 36.20 |
| Dimensionen | 45.85mm x 45.850mm x 68.25mm |
| Technologie | FDM |
| Support Free | YES |
