Open RC Car V3 - Chassis
Open RC Car V3 - Chassis
3D
Published 2020-08-31T17:00:12+00:00
This is the OpenRC Car Version 3!
I designed an Open RC Car V3 in Autodesk Inventor Pro 2019.
I made an Inventor tutorial of how I designed this car: 3D Modeling Car #14 - Open RC Car V3
I made a DIY Video: DIY OpenRC Car V3
Here is a playlist with all the videos I made about this OpenRC Car V3: Playlist - OpenRC Car V3
These are the RC materials that you need:
- Receiver and Transmitter (Carson)
- Servo FS90 (120°)
- Bruchless Motor 1000KV
- 30A Bruchless ESC + SimonK Software
- 7,2 V 750 mah Battery (2 cell)
Used bolts, nuts, washers and ball bearings:
- 8x M3-12 Bolts
- 4x M3-19 Bolts
- 12x M3 Nuts
- 8x M3 Washers
- 2x M4-12 Bolts
- 2X M6-12 Bolts
- 2x M6-25 Bolts
- 2x M6 Nuts
- 2x M8-30 Bolts
- 2x M8 Nuts
- 4x 608ZZ Ball Bearings: 608ZZ Ball Bearing
20-30% Infill
0,15 mm Layer Heights
Printspeed PLA : 40 - 50 mm/s
Printspeed PLA Flex : 30 mm/s
Total print time: 32 Hours
Total filament: 156 grams / 52 Meters
| Date published | 31/08/2020 |
| Menge an Filament | 156 grams |
| Support Free | YES |