PCB Vise 180º flip motorization
PCB Vise 180º flip motorization
3D
Published 2017-12-08T18:21:28+00:00
This is the motorization for project :
https://www.myminifactory.com/object/51672
Because the M6 threaded rod is a pain to screw in and out I've come with the idea of a motorization to easier the use of the vise, hope you enjoy .
You will need:
Double pole, double throw switch for reversing the motor polarity.
(my button needed a 20x22mm hole)
DC motor (I used one from a old VHS with some torque - diameter 26mm and 2mm shaft)
9V battery
some wire
4 small srcews (hole diameter 2,5mm)
2x M6 nut
and a bearing(inside diameter : 7mm / outside diameter: 12mm ).
note: I've uploaded 2 boxes one like mine and an other with a center small hole to you make a hole accordingly with your button dimentions.
(PCB-vise-controler-box-centered-hole-v2.stl)
Credits:
The sprokets by:
yoyoek1
9V battery holder by:
circuito
Printer: Micro Delta Rework
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 100%
Notes: PLA @ 205/60 Cº
| Date published | 08/12/2017 |
| Benoetigte Zeit | 120 - 120 Minuten |
| Menge an Filament | 3000mm |
| Dimensionen | 70x70x40 |
| Technologie | FDM |
| Schwierigkeitsgrad | Very Easy |
| Support Free | YES |